Receita de Pudding Puppy in a Beret de crochê (PDF grátis)

R1with gold: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R10(BLO)54 sc(54)
R11–1354 sc(54)
R148 sc, (dec, 16 sc) ×2, dec, 8 sc(51)
R1551 sc(51)
R168 sc, (dec, 15 sc) ×2, dec, 7 sc(48)
Size before assembly: about 7.4 cm at the widest, 4.3 cm long; 16 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with earbrown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–1218 sc(18)
R13(4 sc, dec) ×3(15)
R142 sc, (dec, 3 sc) ×2, dec, 1 sc(12)
R1512 sc(12)
Size before assembly: about 3.3 cm at the widest, 4.8 cm long; 15 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 33 mm wide. Keep the opening a curve, hollow side forward, not a straight line. Bend ≈ 90° around round 15. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 15, 0.5 st from the centre bottom line, toward the back ). If the ear sticks out, smooth it down along the head by hand.

R1with beret: 4 sc in MR(4)
R2–34 sc(4)
Size before assembly: about 0.5 cm at the widest, 0.9 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with gold: 6 sc in MR(6)
R2inc ×6(12)
R3–412 sc(12)
R5(4 sc, dec) ×2(10)
R6–710 sc(10)
Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with gold: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–518 sc(18)
R62 sc, (dec, 4 sc) ×2, dec, 2 sc(15)
R715 sc(15)
Size before assembly: about 2.4 cm at the widest, 2.1 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with gold: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R41 sc, (dec, 2 sc) ×2, dec, 1 sc(9)
R5(1 sc, dec) ×3(6)
Size before assembly: about 1.5 cm at the widest, 1.7 cm long; 5 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 9 mm (on the head): between rounds 15 and 16, 8 st apart (count along round 15: about 4 st each side of the centre front line).
Satin stitch (on the head): in nose thread, a oval about 6 mm wide and 4.2 mm tall, horizontal stitches; centred in round 17, on the centre front line .
Embroidery in mouth thread (on the head), straight stitches through: (in round 18, 1 st from the centre front line, toward the toy's right ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, on the centre front line) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 1 st from the centre front line, toward the toy's left ).
Blush about 9 mm, dry pastel or blush (on the head, both sides): between rounds 17 and 18, 6 st from the centre front line, toward the toy's left. Colour blush.