amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Koala Hugging a Leaf patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 137 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~7 h
Tamaño
18.8 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet koala pattern for a soft grey koala hugging a bundle of green eucalyptus leaves. This amigurumi koala has big round ears with cream centers, a large dark oval nose, small bead eyes, rosy cheeks and a cream belly patch. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, stands about 19 cm (7.4 in) tall, and is made of a separate head and body with the ears, nose, belly patch and leafy twig sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Cómo tejer Koala Hugging a Leaf a crochet

Avanzado · 19 cm de alto · unas 7 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 21 piezas en vueltas: Body, Head, Ear ×2, Inner ear ×2, Nose, Cheek ×2, Belly patch, Foot ×2, Tail, Arm ×2, Eucalyptus twig, Eucalyptus leaf ×3, Eucalyptus leaf (dark) ×2 (139 vueltas en total).
  2. Rellénalo y móntalo en 16 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 13 reunidos

Más como este

Todos los patrones de koala →Todo en animales →
  • Vista previa de Winnie-the-Pooh with a Honey Pot
    Generador
    TejerloRemix

    Winnie-the-Pooh with a Honey Pot

    por el generador de patrones

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 103 vueltas hechas

  16. Size before assembly: about 7.7 cm at the widest, 7.5 cm long; 24 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  28. Size before assembly: about 10.2 cm at the widest, 8.9 cm long; 35 rounds.
  29. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  16. Size before assembly: about 8.7 cm at the widest, 3.3 cm long; 18 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–10 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 9.7 mm at the centre) and turn rounds 11–18 to the back: they make a thick rounded rim (about 9.3 mm thick) and lie behind as a second layer; the piece is about 87 mm across.<!-- (dish 50 %) -->

  8. A flat circle about 5.3 cm across; 7 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. A flat oval about 4.1 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running vertically, top to bottom. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With noseblack: ch 5.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  7. A flat oval about 6.4 × 4.4 cm; 6 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With cream: ch 7.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  10. Size before assembly: an oval about 4.3 × 3.9 cm at the widest, 3.6 cm long; 13 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  11. With slate: ch 3.
  12. → Start stuffing (firmly) and keep adding as you decrease.
  13. Press the piece flat to about 2.8 cm thick (oval cross-section).<!-- press the piece flat by 35 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 2.8 cm at the widest, 3.7 cm long; 12 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 75° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 5 st from the centre top line, toward the toy's right <!-- st 5.2 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 2 to round 7, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside. Bend the second piece as a mirror image.

  3. Size before assembly: about 0.8 cm at the widest, 3.2 cm long; 9 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  2. Of these: front — 1; low, left — 1; low, right — 1. Flat motif — petal (rounded petal, worked in rounds, one layer of fabric), about 3.5 × 1.9 cm; 1 row.
  3. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  2. Flat motif — petal (rounded petal, worked in rounds, one layer of fabric), about 3.5 × 1.9 cm; 1 row.
  3. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): in round 21, 13 st apart (count along round 21: about 6.6 st each side of the centre front line).
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 25 and 26, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, on the centre front line ) → (between rounds 26 and 27, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 25 and 26, 1.5 st from the centre front line, toward the toy's right ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Tigger the Bouncy Tiger
    Generador
    TejerloRemix

    Tigger the Bouncy Tiger

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Speedy Blue Hedgehog
    Generador
    TejerloRemix

    Speedy Blue Hedgehog

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de White Beagle with Black Ears
    Generador
    TejerloRemix

    White Beagle with Black Ears

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Grey Tabby Loaf Cat
    Generador
    TejerloRemix

    Grey Tabby Loaf Cat

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Confused Yellow Duck
    Generador
    TejerloRemix

    Confused Yellow Duck

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Pudding Puppy in a Beret
    Generador
    TejerloRemix

    Pudding Puppy in a Beret

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Electric Yellow Mouse
    Generador
    TejerloRemix

    Electric Yellow Mouse

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Piglet in a Green Jumper
    Generador
    TejerloRemix

    Piglet in a Green Jumper

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Peter Rabbit in a Blue Jacket
    Generador
    TejerloRemix

    Peter Rabbit in a Blue Jacket

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Bunny in a Pink Hood
    Generador
    TejerloRemix

    Bunny in a Pink Hood

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Simple White Bunny in a Dress
    Generador
    TejerloRemix

    Simple White Bunny in a Dress

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done