amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Koala Hugging a Leaf receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 137 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
3/3
Tempo
~7 h
Tamanho
18.8 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet koala pattern for a soft grey koala hugging a bundle of green eucalyptus leaves. This amigurumi koala has big round ears with cream centers, a large dark oval nose, small bead eyes, rosy cheeks and a cream belly patch. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, stands about 19 cm (7.4 in) tall, and is made of a separate head and body with the ears, nose, belly patch and leafy twig sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Como fazer Koala Hugging a Leaf de crochê

Avançado · 19 cm de altura · cerca de 7 h · fio DK · agulha de 2.5 mm

  1. Faça as 21 partes em carreiras: Body, Head, Ear ×2, Inner ear ×2, Nose, Cheek ×2, Belly patch, Foot ×2, Tail, Arm ×2, Eucalyptus twig, Eucalyptus leaf ×3, Eucalyptus leaf (dark) ×2 (139 carreiras no total).
  2. Encha e monte em 16 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 13 separados

Mais como este

Todas as receitas de amigurumi coala →Tudo em animais →
  • Prévia de Winnie-the-Pooh with a Honey Pot
    Gerador
    FazerRemix

    Winnie-the-Pooh with a Honey Pot

    pelo gerador de receitas

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 103 carreiras feitas

  16. Size before assembly: about 7.7 cm at the widest, 7.5 cm long; 24 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  28. Size before assembly: about 10.2 cm at the widest, 8.9 cm long; 35 rounds.
  29. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  16. Size before assembly: about 8.7 cm at the widest, 3.3 cm long; 18 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–10 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 9.7 mm at the centre) and turn rounds 11–18 to the back: they make a thick rounded rim (about 9.3 mm thick) and lie behind as a second layer; the piece is about 87 mm across.<!-- (dish 50 %) -->

  8. A flat circle about 5.3 cm across; 7 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. A flat oval about 4.1 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running vertically, top to bottom. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With noseblack: ch 5.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  7. A flat oval about 6.4 × 4.4 cm; 6 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With cream: ch 7.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  10. Size before assembly: an oval about 4.3 × 3.9 cm at the widest, 3.6 cm long; 13 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  11. With slate: ch 3.
  12. → Start stuffing (firmly) and keep adding as you decrease.
  13. Press the piece flat to about 2.8 cm thick (oval cross-section).<!-- press the piece flat by 35 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 2.8 cm at the widest, 3.7 cm long; 12 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 75° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 5 st from the centre top line, toward the toy's right <!-- st 5.2 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 2 to round 7, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside. Bend the second piece as a mirror image.

  3. Size before assembly: about 0.8 cm at the widest, 3.2 cm long; 9 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  2. Of these: front — 1; low, left — 1; low, right — 1. Flat motif — petal (rounded petal, worked in rounds, one layer of fabric), about 3.5 × 1.9 cm; 1 row.
  3. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  2. Flat motif — petal (rounded petal, worked in rounds, one layer of fabric), about 3.5 × 1.9 cm; 1 row.
  3. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): in round 21, 13 st apart (count along round 21: about 6.6 st each side of the centre front line).
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 25 and 26, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, on the centre front line ) → (between rounds 26 and 27, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 25 and 26, 1.5 st from the centre front line, toward the toy's right ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Tigger the Bouncy Tiger
    Gerador
    FazerRemix

    Tigger the Bouncy Tiger

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Speedy Blue Hedgehog
    Gerador
    FazerRemix

    Speedy Blue Hedgehog

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de White Beagle with Black Ears
    Gerador
    FazerRemix

    White Beagle with Black Ears

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Grey Tabby Loaf Cat
    Gerador
    FazerRemix

    Grey Tabby Loaf Cat

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Confused Yellow Duck
    Gerador
    FazerRemix

    Confused Yellow Duck

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pudding Puppy in a Beret
    Gerador
    FazerRemix

    Pudding Puppy in a Beret

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Electric Yellow Mouse
    Gerador
    FazerRemix

    Electric Yellow Mouse

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Piglet in a Green Jumper
    Gerador
    FazerRemix

    Piglet in a Green Jumper

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Peter Rabbit in a Blue Jacket
    Gerador
    FazerRemix

    Peter Rabbit in a Blue Jacket

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Bunny in a Pink Hood
    Gerador
    FazerRemix

    Bunny in a Pink Hood

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Simple White Bunny in a Dress
    Gerador
    FazerRemix

    Simple White Bunny in a Dress

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done