amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Long-Legged Puppy patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 144 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~5 h
Tamaño
13.5 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

This free crochet dog pattern makes a long-legged white puppy in a blue striped sweater, sitting with its legs stretched out and one paw raised in a wave. The amigurumi puppy tilts its head, with floppy brown ears, rosy cheeks, a red collar with a gold tag and blue-and-cream striped socks on its long tapered legs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, sits about 14 cm (5.5 in) tall, and has safety eyes and a safety nose and a separate sweater with a ribbed hem that holds the arms. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes.

Cómo tejer Long-Legged Puppy a crochet

Avanzado · 14 cm de alto · unas 5 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 15 piezas en vueltas: Body, Sweater, Collar, Head, Tag, Muzzle, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Tail (146 vueltas en total).
  2. Rellénalo y móntalo en 12 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 12 reunidos

Más como este

Todos los patrones de perro →Todo en animales →
  • Vista previa de Winnie-the-Pooh with a Honey Pot
    Generador
    TejerloRemix

    Winnie-the-Pooh with a Honey Pot

    por el generador de patrones

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 96 vueltas hechas

  16. Size before assembly: about 5.8 cm at the widest, 7.9 cm long; 24 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  12. Size before assembly: about 6.2 cm at the widest, 5.3 cm long; 13 rounds.
  13. Change to cream (pull it through on the last yarn-over of R5).
  14. Change to denim blue (pull it through on the last yarn-over of R6).
  15. Change to cream (pull it through on the last yarn-over of R8).
  16. Change to denim blue (pull it through on the last yarn-over of R9).
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Size before assembly: about 4.2 cm at the widest, 0.7 cm long; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  21. Size before assembly: about 7.3 cm at the widest, 5.9 cm long; 24 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Flat motif — circle (worked in rounds, one layer of fabric), about 1.5 × 1.5 cm; 2 rows.
  4. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  5. Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.5 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With snow white: ch 4.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  10. Size before assembly: about 3.6 cm at the widest, 4.6 cm long; 14 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.4 mm deep in front, a rounded back; about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 12<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 2 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 12, 1.5 st from the centre bottom line, toward the back <!-- st 1.31 back -->). If the ear sticks out, smooth it down along the head by hand.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  11. Size before assembly: about 1.6 cm at the widest, 7.5 cm long; 21 rounds.
  12. Change to cream (pull it through on the last yarn-over of R5).
  13. Change to denim blue (pull it through on the last yarn-over of R6).
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 55° around round 9<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 9, 1 st from the centre top line, toward the toy's right <!-- st 0.88 right -->). On the inner side draw rounds 8 and 10 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  17. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 9.5 cm long; 27 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  18. With denim blue: ch 4.
  19. Change to cream (pull it through on the last yarn-over of R5).
  20. Change to denim blue (pull it through on the last yarn-over of R7).
  21. Change to cream (pull it through on the last yarn-over of R9).
  22. Change to denim blue (pull it through on the last yarn-over of R11).
  23. Change to snow white (pull it through on the last yarn-over of R13).
  24. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 14<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 14, on the centre bottom line <!-- st 0.08 right -->). On the inner side draw rounds 13 and 15 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  6. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 7<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 7, on the centre top line). On the inner side draw rounds 6 and 8 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): between rounds 12 and 13, 9 st apart (count along round 12: about 4.5 st each side of the centre front line).
  • Safety nose, oval, 9×6.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose black #1f1b1a.
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in dark brown thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 2 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 4.5 mm wide and 4 mm tall, horizontal stitches; centred in round 3, on the centre bottom line.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Tigger the Bouncy Tiger
    Generador
    TejerloRemix

    Tigger the Bouncy Tiger

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Speedy Blue Hedgehog
    Generador
    TejerloRemix

    Speedy Blue Hedgehog

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de White Beagle with Black Ears
    Generador
    TejerloRemix

    White Beagle with Black Ears

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Grey Tabby Loaf Cat
    Generador
    TejerloRemix

    Grey Tabby Loaf Cat

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Confused Yellow Duck
    Generador
    TejerloRemix

    Confused Yellow Duck

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Pudding Puppy in a Beret
    Generador
    TejerloRemix

    Pudding Puppy in a Beret

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Electric Yellow Mouse
    Generador
    TejerloRemix

    Electric Yellow Mouse

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Piglet in a Green Jumper
    Generador
    TejerloRemix

    Piglet in a Green Jumper

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Peter Rabbit in a Blue Jacket
    Generador
    TejerloRemix

    Peter Rabbit in a Blue Jacket

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Bunny in a Pink Hood
    Generador
    TejerloRemix

    Bunny in a Pink Hood

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Simple White Bunny in a Dress
    Generador
    TejerloRemix

    Simple White Bunny in a Dress

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done