amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Long-Legged Puppy receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 144 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
3/3
Tempo
~5 h
Tamanho
13.5 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

This free crochet dog pattern makes a long-legged white puppy in a blue striped sweater, sitting with its legs stretched out and one paw raised in a wave. The amigurumi puppy tilts its head, with floppy brown ears, rosy cheeks, a red collar with a gold tag and blue-and-cream striped socks on its long tapered legs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, sits about 14 cm (5.5 in) tall, and has safety eyes and a safety nose and a separate sweater with a ribbed hem that holds the arms. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes.

Como fazer Long-Legged Puppy de crochê

Avançado · 14 cm de altura · cerca de 5 h · fio DK · agulha de 2.5 mm

  1. Faça as 15 partes em carreiras: Body, Sweater, Collar, Head, Tag, Muzzle, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Tail (146 carreiras no total).
  2. Encha e monte em 12 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 12 separados

Mais como este

Todas as receitas de amigurumi cachorro →Tudo em animais →
  • Prévia de Winnie-the-Pooh with a Honey Pot
    Gerador
    FazerRemix

    Winnie-the-Pooh with a Honey Pot

    pelo gerador de receitas

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 96 carreiras feitas

  1. Size before assembly: about 5.8 cm at the widest, 7.9 cm long; 24 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 6.2 cm at the widest, 5.3 cm long; 13 rounds.
  2. Change to cream (pull it through on the last yarn-over of R5).
  3. Change to denim blue (pull it through on the last yarn-over of R6).
  4. Change to cream (pull it through on the last yarn-over of R8).
  5. Change to denim blue (pull it through on the last yarn-over of R9).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 4.2 cm at the widest, 0.7 cm long; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 7.3 cm at the widest, 5.9 cm long; 24 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — circle (worked in rounds, one layer of fabric), about 1.5 × 1.5 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.5 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With snow white: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.6 cm at the widest, 4.6 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.4 mm deep in front, a rounded back; about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 12<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 2 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 12, 1.5 st from the centre bottom line, toward the back <!-- st 1.31 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.6 cm at the widest, 7.5 cm long; 21 rounds.
  2. Change to cream (pull it through on the last yarn-over of R5).
  3. Change to denim blue (pull it through on the last yarn-over of R6).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 55° around round 9<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 9, 1 st from the centre top line, toward the toy's right <!-- st 0.88 right -->). On the inner side draw rounds 8 and 10 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 9.5 cm long; 27 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With denim blue: ch 4.
  3. Change to cream (pull it through on the last yarn-over of R5).
  4. Change to denim blue (pull it through on the last yarn-over of R7).
  5. Change to cream (pull it through on the last yarn-over of R9).
  6. Change to denim blue (pull it through on the last yarn-over of R11).
  7. Change to snow white (pull it through on the last yarn-over of R13).
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 14<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 14, on the centre bottom line <!-- st 0.08 right -->). On the inner side draw rounds 13 and 15 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 7<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 7, on the centre top line). On the inner side draw rounds 6 and 8 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): between rounds 12 and 13, 9 st apart (count along round 12: about 4.5 st each side of the centre front line).
  • Safety nose, oval, 9×6.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose black #1f1b1a.
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in dark brown thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 2 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 4.5 mm wide and 4 mm tall, horizontal stitches; centred in round 3, on the centre bottom line.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Tigger the Bouncy Tiger
    Gerador
    FazerRemix

    Tigger the Bouncy Tiger

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Speedy Blue Hedgehog
    Gerador
    FazerRemix

    Speedy Blue Hedgehog

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de White Beagle with Black Ears
    Gerador
    FazerRemix

    White Beagle with Black Ears

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Grey Tabby Loaf Cat
    Gerador
    FazerRemix

    Grey Tabby Loaf Cat

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Confused Yellow Duck
    Gerador
    FazerRemix

    Confused Yellow Duck

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pudding Puppy in a Beret
    Gerador
    FazerRemix

    Pudding Puppy in a Beret

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Electric Yellow Mouse
    Gerador
    FazerRemix

    Electric Yellow Mouse

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Piglet in a Green Jumper
    Gerador
    FazerRemix

    Piglet in a Green Jumper

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Peter Rabbit in a Blue Jacket
    Gerador
    FazerRemix

    Peter Rabbit in a Blue Jacket

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Bunny in a Pink Hood
    Gerador
    FazerRemix

    Bunny in a Pink Hood

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Simple White Bunny in a Dress
    Gerador
    FazerRemix

    Simple White Bunny in a Dress

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done