amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Hedgehog in a Santa Hat Ornament patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 57 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~2 h
Tamaño
9.3 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet Christmas ornaments pattern for a round hazel-brown hedgehog in a red Santa hat with a pompom and a golden hanging loop. This amigurumi hedgehog has a cream face, a dark little nose, round ears and a back covered in short yarn fringe quills that make it look spiky and soft at once. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 9.3 cm (3.7 in) tall with the hat; the eyes are embroidered, the face, snout, ears, feet and hat are sewn on and the quills are knotted in. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

Cómo tejer Hedgehog in a Santa Hat Ornament a crochet

Intermedio · 9 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 13 piezas en vueltas: Head-body ball, Cream face, Museau, Nez, Oreille ×2, Joue ×2, Pied ×2, Santa hat, Pompon, Hanging loop (67 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 13 reunidos

RemixTejerlo

Muestra

1 ms ≈ 3 mm de large, 1 tour ≈ 2,7 mm de haut (10 cm ≈ 33 ms × 37 tours) ; fil d’environ 1,4 mm d’épaisseur. L’échantillon détermine la taille du jouet ; crochetez serré pour que le rembourrage ne se voie pas.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 64 vueltas hechas

  1. Taille avant assemblage : environ 5,4 cm au plus large, 5,4 cm de long ; 26 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 6 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Un ovale plat d’environ 4,2 × 2,7 cm ; 5 tours. Crochetée autour d’une chaînette, elle est ovale : cousez-la avec le grand côté (le long de la chaînette) d’un côté à l’autre. Le marqueur de début de tour est au milieu d’un grand côté (ligne médiane de la pièce), alors que le T1 commence dans un virage : après le T1, décalez le début du tour — encore 2 ms (non comptées) et placez-y le marqueur. Les augmentations tombent dans les virages.
  2. En crème : 7 ml.
  3. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer.

  1. Taille avant assemblage : environ 1,2 cm au plus large, 0,9 cm de long ; 4 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Rembourrez légèrement juste avant de coudre ; un peu moins près du bord, puis ajoutez une pincée quand la couture est presque finie.

  1. Taille avant assemblage : environ 0,8 cm au plus large, 1 cm de long ; 4 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 4 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,7 cm au plus large, 0,9 cm de long ; 4 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer. Formez une coupelle : les tours 1–2 sont l’avant de la pièce, le cercle magique son centre. Enfoncez le centre pour creuser l’avant (environ 1,4 mm au centre) et retournez les tours 3–4 vers l’arrière : ils forment un bord épais et arrondi (environ 5,9 mm) et passent derrière en deuxième épaisseur ; la pièce mesure environ 17 mm de diamètre.

  1. Un cercle plat d’environ 1 cm de diamètre ; 2 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer.

  1. Taille avant assemblage : environ 0,8 cm au plus large, 0,7 cm de long ; 3 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Rembourrez très légèrement et aplatissez à environ 4 mm d’épaisseur.

  1. Taille avant assemblage : environ 3 cm au plus large, 2,2 cm de long ; 10 tours.
  2. Passer en blanc (à faire au dernier jeté du T7).
  3. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer. Pliure ≈ 30° vers le tour 5. Pliez la pièce pour que l’intérieur de la pliure soit tourné vers l’arrière sur le jouet fini (sur la pièce : au tour 5, sur la ligne médiane arrière). Sur le côté intérieur, rapprochez les tours 4 et 6 (2 tours passent dans le pli) : avec l’aiguille et un fil assorti, faites 3–4 points dans les brins des deux tours sur environ 6 m, serrez jusqu’à l’angle et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,4 cm au plus large, 1,7 cm de long ; 7 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 6 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,5 cm au plus large (à plat) ; 2 tours. Chaque pièce est faite de deux cercles (devant et dos) : faites 2 cercles — 1 comme ci-dessous et 1 unis en doré (mêmes tours, sans changement de couleur).
  2. Arrêtez le fil. Superposez un devant et un cercle simple envers contre envers et faites le tour en ms à travers les deux épaisseurs : 16 ms. Ne pas rembourrer. Laissez une longue aiguillée (~30 cm) pour coudre.

Tout le visage est brodé. Ordre : les yeux (point de bourdon noir), puis les reflets blanc par-dessus, puis le nez et la bouche, le blush en dernier. Marquez d’abord les centres avec des épingles et comparez avec l’image. Faites sortir les fils là où une pièce cousue les cachera, ou enfouissez-les dans le rembourrage.

  • Yeux brodés (sur la pièce « cream face ») (2, symétrique : le côté gauche du jouet est décrit, le droit en miroir) : au fil noir, un ovale d’environ 4,4 mm de large et 5,2 mm de haut, points horizontaux ; centré entre les tours 2 et 3, à 3 m de la ligne médiane du dessus, vers le côté gauche du jouet.
  • Reflet de l’œil (sur la pièce « cream face ») (2, symétrique : le côté gauche du jouet est décrit, le droit en miroir) : au fil blanc par-dessus l’œil brodé, un ovale d’environ 1,8 mm de large et 1,8 mm de haut, points horizontaux ; centré entre les tours 2 et 3, à 3 m de la ligne médiane du dessus, vers le côté gauche du jouet, puis décalé de 0,8 mm vers la droite et 1,3 mm vers le haut (en regardant le visage du jouet).
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 9 and 10, 11 st from the centre front line, toward the toy’s left -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy’s left -> between rounds 9 and 10, on the centre back line -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy’s right -> between rounds 9 and 10, 11 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 14 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 11 and 12, 13 st from the centre front line, toward the toy’s left -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy’s left -> between rounds 11 and 12, on the centre back line -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy’s right -> between rounds 11 and 12, 13 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 13 and 14, 14.5 st from the centre front line, toward the toy’s left -> between rounds 13 and 14, 6 st from the centre back line, toward the toy’s left -> between rounds 13 and 14, on the centre back line -> between rounds 13 and 14, 6 st from the centre back line, toward the toy’s right -> between rounds 13 and 14, 14.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.

Head-body ball · T1–T5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
  • Mane (on the head-body ball): cut 12 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 15 and 16, 14.5 st from the centre front line, toward the toy’s left -> between rounds 15 and 16, 6 st from the centre back line, toward the toy’s left -> between rounds 15 and 16, on the centre back line -> between rounds 15 and 16, 6 st from the centre back line, toward the toy’s right -> between rounds 15 and 16, 14.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 14 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 17 and 18, 13 st from the centre front line, toward the toy’s left -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy’s left -> between rounds 17 and 18, on the centre back line -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy’s right -> between rounds 17 and 18, 13 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 19 and 20, 11 st from the centre front line, toward the toy’s left -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy’s left -> between rounds 19 and 20, on the centre back line -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy’s right -> between rounds 19 and 20, 11 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along in round 21, 9.5 st from the centre front line, toward the toy’s left -> in round 21, 4 st from the centre back line, toward the toy’s left -> in round 21, on the centre back line -> in round 21, 4 st from the centre back line, toward the toy’s right -> in round 21, 9.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 14 and 15, 11 st from the centre front line, toward the toy’s left -> between rounds 15 and 16, 13 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 17 and 18, 10 st from the centre front line, toward the toy’s left -> between rounds 18 and 19, 10.5 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 20 and 21, 7.5 st from the centre front line, toward the toy’s left -> between rounds 21 and 22, 9 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    CM
    cercle magique
    ms
    maille serrée
    aug
    augmentation : 2 ms dans la même maille
    dim
    diminution : 2 mailles écoulées ensemble en 1 ms (diminution invisible conseillée)
    BArr
    crocheter le tour dans le brin arrière uniquement
    BAv
    crocheter le tour dans le brin avant uniquement
    ml
    maille en l’air
    mc
    maille coulée
    m
    maille
    T5
    tour 5 ; T7–14 = les tours 7 à 14 sont identiques
    (…) ×6
    répéter 6 fois
    (24)
    mailles du tour une fois terminé