amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Cute Krampus patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 90 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
2/3
Tiempo
~3 h
Tamaño
13.3 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet krampus pattern: a Cute Krampus amigurumi, about 13 cm tall in DK yarn with a 2.5 mm hook. A chubby black Krampus with an amber-eyed face, curved cream horns, a long red tongue and a gold bell on a red strap. You need about 90 m of yarn: 55 m ebony, 10 m dark grey, 5 m red, 10 m cream, 5 m gold and 5 m dark red. Plan on roughly 3 hours. It is a friendly little guest for the holiday shelf or tree, and a fun gift for fans of winter folklore. Spin the 3D model and follow the round-by-round pattern as you crochet.

Cómo tejer Cute Krampus a crochet

Intermedio · 13 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 14 piezas en vueltas: Body, Head, Ear ×2, Arm ×2, Foot ×2, Horn ×2, Tail, Red strap, Bell, Hanging loop (90 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

Más como este

Todo en fantasía →
  • Vista previa de Green Dino with a Red Saddle
    Generador
    TejerloRemix

    Green Dino with a Red Saddle

    por el generador de patrones

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 74 vueltas hechas

  1. Size before assembly: about 6.4 cm at the widest, 4.9 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to ebony (pull it through on the last yarn-over of R13).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.3 cm at the widest, 7 cm long; 28 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Change to ebony (pull it through on the last yarn-over of R23).
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.7 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: about 1.3 cm at the widest, 2 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2 cm at the widest, 1.9 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest, 4.3 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 125° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 5, 0.5 st from the centre back line, toward the toy's left <!-- st 0.62 left -->). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1.1 cm at the widest, 2.8 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 4<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 4, on the centre top line). On the inner side draw rounds 3 and 5 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 4.9 cm at the widest, 0.7 cm long; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the head): between rounds 15 and 16, 8 st apart (count along round 15: about 4.2 st each side of the centre front line). Iris amber #e8a526.
  • Satin stitch (on the head): in pink thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches; centred between rounds 17 and 18, on the centre front line.
  • Satin stitch (on the head): in dark red thread, a oval about 12 mm wide and 4 mm tall, horizontal stitches; centred between rounds 20 and 21, on the centre front line .
  • Fringe (on the head): cut 10 pieces of yarn (ebony) about 44 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 6, 4 st from the centre front line, toward the toy's right -> in round 7, on the centre front line -> in round 6, 4 st from the centre front line, toward the toy's left, evenly spaced. Trim to about 12 mm.

Body · R1–R4

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Big Grey Forest Spirit
    Generador
    TejerloRemix

    Big Grey Forest Spirit

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Black Baby Dragon
    Generador
    TejerloRemix

    Black Baby Dragon

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Blue Alien with Big Ears
    Generador
    TejerloRemix

    Blue Alien with Big Ears

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Little Spider Hero
    Generador
    TejerloRemix

    Little Spider Hero

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Sleepy Big Belly Bear
    Generador
    TejerloRemix

    Sleepy Big Belly Bear

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Little Green Ogre
    Generador
    TejerloRemix

    Little Green Ogre

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Burlap Sack Doll
    Generador
    TejerloRemix

    Burlap Sack Doll

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Happy Snowman with Twig Arms
    Generador
    TejerloRemix

    Happy Snowman with Twig Arms

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Yellow Capsule Helper
    Generador
    TejerloRemix

    Yellow Capsule Helper

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Ghost in a Mouse Costume
    Generador
    TejerloRemix

    Ghost in a Mouse Costume

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Pirate Boy in a Straw Hat
    Generador
    TejerloRemix

    Pirate Boy in a Straw Hat

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • ×V×V×V×V××V××V××V××V××V×
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done