amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Coiled Christmas Dragon modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 133 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
3/3
Temps
~4 h
Taille
13.3 cm
Bizarrerie
2/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet dragon pattern: a Coiled Christmas Dragon amigurumi, about 13 cm tall in DK yarn with a 2.5 mm hook. A green dragon curled in a coil, with gold horns, red wings, a striped scarf, a tiny Santa hat and a white snowflake puff at its mouth. You need about 115 m of yarn: 60 m green, 25 m red, 10 m cream, 10 m white, 5 m gold and 5 m pink. Plan on roughly 4 hours. It makes a cosy desk buddy or a gift for dragon fans who also love Christmas. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Coiled Christmas Dragon

Avancé · 13 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 12 pièces en rangs : Coiled body, Head and neck, Snout, Horn ×2, Santa hat, Pompom, Wing ×2, Snowflake, Cheek ×2 (164 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

Dans le même genre

Tous les modèles d’amigurumi dragon →Tout dans fantastique →
  • Aperçu de Green Dino with a Red Saddle
    Générateur
    CrocheterRemix

    Green Dino with a Red Saddle

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 94

  1. Size before assembly: about 2.7 cm at the widest, 34.2 cm long; 89 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre back line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in green, 1 sc in cream, 2 sc in green
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Bend ≈ 480° around round 12<!-- the bend spreads over 2 rounds --><!-- coil 2 pitch 16 -->. The piece rolls up into a spiral (about 1.3 turns) from round 12 to its end: after stuffing, roll it up starting from the last round (round 89) toward the side that faces backward on the finished toy; the turns lie close, each wider than the last. From the last round back to round 12 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

  1. Size before assembly: an oval about 7.7 × 6.1 cm at the widest, 7.2 cm long; 24 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the top of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With green: ch 6.
  3. Change to red (pull it through on the last yarn-over of R19).
  4. Change to white (pull it through on the last yarn-over of R21).
  5. Change to red (pull it through on the last yarn-over of R22).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 3 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest, 2.2 cm long; 6 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 10 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.4 cm at the widest, 6.6 cm long; 21 rounds.
  2. Change to white (pull it through on the last yarn-over of R18).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 115° around round 9<!-- the bend spreads over 5 rounds -->. Bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 9, 3.5 st from the centre front line, toward the toy's right <!-- st 3.55 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 11, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 4 × 7.5 cm; 8 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Flat motif — star (worked in rounds, one layer of fabric), about 3.2 × 2.8 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head and neck): in round 12, 8 st apart (count along round 12: about 4 st each side of the centre front line).
  • Satin stitch (on the snout): in black thread, a oval about 8 mm wide and 5 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in black thread (on the snout), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in black thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1.5 st from the centre bottom line, toward the toy's left ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    par le générateur de modèles
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Big Grey Forest Spirit
    Générateur
    CrocheterRemix

    Big Grey Forest Spirit

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Black Baby Dragon
    Générateur
    CrocheterRemix

    Black Baby Dragon

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Blue Alien with Big Ears
    Générateur
    CrocheterRemix

    Blue Alien with Big Ears

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Spider Hero
    Générateur
    CrocheterRemix

    Little Spider Hero

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Sleepy Big Belly Bear
    Générateur
    CrocheterRemix

    Sleepy Big Belly Bear

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Green Ogre
    Générateur
    CrocheterRemix

    Little Green Ogre

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Burlap Sack Doll
    Générateur
    CrocheterRemix

    Burlap Sack Doll

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Happy Snowman with Twig Arms
    Générateur
    CrocheterRemix

    Happy Snowman with Twig Arms

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Yellow Capsule Helper
    Générateur
    CrocheterRemix

    Yellow Capsule Helper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Ghost in a Mouse Costume
    Générateur
    CrocheterRemix

    Ghost in a Mouse Costume

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pirate Boy in a Straw Hat
    Générateur
    CrocheterRemix

    Pirate Boy in a Straw Hat

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0