amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Cloud Puppy with Long Ears modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 87 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
9.7 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A crochet amigurumi inspired by Cinnamoroll from Sanrio: a white puppy with very long floppy ears, blue eyes and a cinnamon-roll tail. About 10 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Sanrio.

Comment crocheter Cloud Puppy with Long Ears

Intermédiaire · 10 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 11 pièces en rangs : Body, Head, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Curly tail (87 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 7 prêts

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixCrocheter

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 70

  1. Size before assembly: about 5.7 cm at the widest, 3.9 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.7 cm at the widest, 6.2 cm long; 27 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.4 cm at the widest, 9.2 cm long; 27 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4.6 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 44 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 27<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 27, 1 st from the centre bottom line, toward the back <!-- st 0.96 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 2.1 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 360° around round 3<!-- the bend spreads over 10 rounds --><!-- coil 2 -->. The piece rolls up into a spiral (about 1 turn) from round 3 to its end: after stuffing, roll it up starting from the last round (round 3) toward the side that faces up on the finished toy; the turns lie close, each wider than the last. From the last round back to round 3 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 16, 9 st apart (count along round 16: about 4.4 st each side of the centre front line). Colour eyeblue #7fb2f0.
  • Embroidery in mouth thread (on the head), straight stitches through: (in round 18, 1 st from the centre front line, toward the toy's right ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 1 st from the centre front line, toward the toy's left ).
  • Embroidery in swirl thread (on the curly tail), straight stitches through: (in round 1, on the centre top line ) → (in round 1, 0.5 st from the centre top line, toward the toy's left ) → (in round 1, 1 st from the centre top line, toward the toy's left ) → (in round 1, 1.5 st from the centre top line, toward the toy's left ) → (in round 1, 2 st from the centre top line, toward the toy's left ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 1, on the centre bottom line ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 1, 2 st from the centre top line, toward the toy's right ) → (in round 1, 1.5 st from the centre top line, toward the toy's right ) → (in round 1, 1 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, on the centre top line ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's left ) → (between rounds 1 and 2, 1 st from the centre top line, toward the toy's left ) → (in round 2, 3 st from the centre top line, toward the toy's left ) → (in round 2, 4 st from the centre top line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ) → (in round 2, 4 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 3 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 2 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 1 st from the centre top line, toward the toy's right) → (between rounds 2 and 3, on the centre top line ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done