Cloud Puppy with Long Ears receita de crochê

Equilibrada matematicamenteVerificado por script: nas 87 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade: 2/3
Tempo: ~3 h
Tamanho: 9.7 cm
Esquisitice: 1/5

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A crochet amigurumi inspired by Cinnamoroll from Sanrio: a white puppy with very long floppy ears, blue eyes and a cinnamon-roll tail. About 10 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Sanrio.

Como fazer Cloud Puppy with Long Ears de crochê

Intermediário · 10 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

Faça as 11 partes em carreiras: Body, Head, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Curly tail (87 carreiras no total).
Encha e monte em 7 etapas; cada uma acende no modelo 3D onde a parte vai.
Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 7 separados

Fio whiteespessura DK85 m
Fio blushespessura DK5 m
Agulha de crochêde 2.5 mm1
Olhos de segurançaou borde-os para crianças pequenas2
Enchimentofibra siliconada30 g
Marcador de pontospara carreiras em espiral1
Agulha de tapeçariapara costurar as partes1

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Todas as receitas de amigurumi cachorro →Tudo em animais →

Gerador
Winnie-the-Pooh with a Honey Pot
pelo gerador de receitas

Remix Fazer

0 de 70 carreiras feitas

R1with blush: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3–412 sc(12)
R5(4 sc, dec) ×2(10)
R6–710 sc(10)
Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–518 sc(18)
R62 sc, (dec, 4 sc) ×2, dec, 2 sc(15)
R715 sc(15)
Size before assembly: about 2.4 cm at the widest, 2.1 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
A flat circle about 2.3 cm across; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 360° around round 3. The piece rolls up into a spiral (about 1 turn) from round 3 to its end: after stuffing, roll it up starting from the last round (round 3) toward the side that faces up on the finished toy; the turns lie close, each wider than the last. From the last round back to round 3 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 12 mm (on the head): in round 16, 9 st apart (count along round 16: about 4.4 st each side of the centre front line). Colour eyeblue #7fb2f0.
Embroidery in mouth thread (on the head), straight stitches through: (in round 18, 1 st from the centre front line, toward the toy's right ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 1 st from the centre front line, toward the toy's left ).
Embroidery in swirl thread (on the curly tail), straight stitches through: (in round 1, on the centre top line ) → (in round 1, 0.5 st from the centre top line, toward the toy's left ) → (in round 1, 1 st from the centre top line, toward the toy's left ) → (in round 1, 1.5 st from the centre top line, toward the toy's left ) → (in round 1, 2 st from the centre top line, toward the toy's left ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 1, on the centre bottom line ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 1, 2 st from the centre top line, toward the toy's right ) → (in round 1, 1.5 st from the centre top line, toward the toy's right ) → (in round 1, 1 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, on the centre top line ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's left ) → (between rounds 1 and 2, 1 st from the centre top line, toward the toy's left ) → (in round 2, 3 st from the centre top line, toward the toy's left ) → (in round 2, 4 st from the centre top line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ) → (in round 2, 4 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 3 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 2 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 1 st from the centre top line, toward the toy's right) → (between rounds 2 and 3, on the centre top line ).