amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Nourriture

Angry Donut modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 28 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesNourriture

Difficulté
1/3
Temps
~2 h
Taille
9.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet donut pattern: a Angry Donut amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. A round pink-frosted donut covered in rainbow sprinkles glares with slanted brows, glossy black eyes and a frowning mouth, while three grey puffs of steam rise from the top. You need about 35 m of yarn: 15 m golden brown, 10 m pink, 5 m light grey and 5 m rose. Plan on roughly 1 hours. It is a grumpy-cute gift for donut lovers and a good pick-me-up for a bad-mood Monday. Spin the 3D model and follow the round-by-round pattern whenever you like.

Comment crocheter Angry Donut

Pour débutants · 9 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 6 pièces en rangs : Donut, Cheek ×2, Small steam puff ×2, Steam puff (28 rangs au total).
  2. Rembourrez et assemblez en 5 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 26

  1. Size before assembly: about 8 cm at the widest, 4.9 cm long; 17 rounds.
  2. Change to pink (pull it through on the last yarn-over of R10).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.2 cm at the widest, 1.4 cm long; 4 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.5 cm long; 5 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the donut): in round 15, 32 st apart (count along round 15: about 1.8 st each side of the centre bottom line).
  • Embroidery in dark brown thread (on the donut), straight stitches through: (in round 13, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 14, on the centre bottom line) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 13, 1 st from the centre bottom line, toward the toy's right ).
  • Embroidery in dark brown thread (on the donut) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 17, 2.5 st from the centre bottom line, toward the toy's left ) → (in round 17, 2 st from the centre bottom line, toward the toy's left ) → (between rounds 16 and 17, 2 st from the centre bottom line, toward the toy's left ) → (in round 16, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 16, 1 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 3 st from the centre top line, toward the toy's left .
  • Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 14, 5.5 st from the centre top line, toward the toy's left .
  • Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 12 and 13, 12 st from the centre top line, toward the toy's left.
  • Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° clockwise (looking at that surface); centred in round 14, 12.5 st from the centre top line, toward the toy's left .
  • Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 13, 7 st from the centre bottom line, toward the toy's left .
  • (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 2 st from the centre top line, toward the toy's left .

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Satin stitch
  • Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 95° clockwise (looking at that surface); centred in round 16, 5 st from the centre top line, toward the toy's left .
  • Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 16, 8 st from the centre top line, toward the toy's left .
  • Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 8.5 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 14, 12 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 12 and 13, 11 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred between rounds 14 and 15, 6.5 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 16, 10 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 7 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 3.5 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 13 and 14, 3 st from the centre top line, toward the toy's right .
  • Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred in round 16, 1 st from the centre top line, toward the toy's right .