amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Big Polar Bear modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 138 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~12 h
Taille
33.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet polar bear pattern for a big, squishy cushion bear in red earmuffs and a candy-striped scarf. This amigurumi polar bear is snow white with an ivory muzzle, small round ears, rosy cheeks and a scarf end with a little fringe that hangs over its tummy. It is worked in the round in single crochet with bulky yarn and a 6 mm hook, ends up about 33 cm (13 in) tall, and uses 30 mm safety eyes; the ribbed scarf, earmuffs and chain headband, paws and feet are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see every piece - a cozy Christmas gift to hug all winter.

Comment crocheter Big Polar Bear

Avancé · 33 cm de haut · environ 12 h · fil bulky · crochet de 6 mm

  1. Crochetez les 16 pièces en rangs : Body, Scarf, Head, Muzzle, Earmuff ×2, Ear ×2, Scarf end, Front paw ×2, Foot ×2, Foot pad ×2, Tail (138 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 7.5 mm wide, 1 round ≈ 6.8 mm tall (10 cm ≈ 13 sc × 15 rounds); yarn about 3.6 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 118

  1. Size before assembly: about 24.4 cm at the widest, 12.5 cm long; 25 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 20.4 cm at the widest, 3.5 cm long; 3 rounds.
  2. Change to white (pull it through on the last yarn-over of R1).
  3. Change to scarf red (pull it through on the last yarn-over of R2).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 26.3 cm at the widest, 20.4 cm long; 44 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 23.7 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 11.6 × 7.1 cm at the widest, 3.1 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 3 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With ivory: ch 8.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.6 cm at the widest, 5.7 cm long; 13 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 4.6 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.5 cm at the widest, 2.8 cm long; 8 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R3).
  3. → This piece is not stuffed.
  4. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–4 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 7.5 mm at the centre) and turn rounds 5–8 to the back: they make a thick rounded rim (about 15.1 mm thick) and lie behind as a second layer; the piece is about 75 mm across.<!-- (dish 50 %) -->

  1. Size before assembly: an oval about 4 × 1 cm at the widest, 7.4 cm long; 11 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With scarf red: ch 6.
  3. Change to white (pull it through on the last yarn-over of R2).
  4. Change to scarf red (pull it through on the last yarn-over of R4).
  5. Change to white (pull it through on the last yarn-over of R6).
  6. Change to scarf red (pull it through on the last yarn-over of R8).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % --> Bend ≈ 60° around round 7<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 7, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 7 and 8 together.

  1. Size before assembly: about 5.1 cm at the widest, 4.9 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.4 cm at the widest, 5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 4.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 3.5 cm at the widest, 2.5 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 30 mm (on the head): in round 21, 16 st apart (count along round 21: about 7.9 st each side of the centre front line).
  • Satin stitch (on the muzzle): in nose black thread, a oval about 24 mm wide and 16 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in nose black thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in nose black thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's left ) → (in round 2, 2.5 st from the centre bottom line, toward the toy's left ).
  • Blush about 24 mm, dry pastel or blush (on the head, both sides): in round 24, 13 st from the centre front line, toward the toy's left . Colour blush pink.
  • Strap (on the head): with muff red, ch 50 (≈ 27.6 cm); for a firmer strap sl st back along it. Sew it along (in round 16, 22.5 st from the centre front line, toward the toy's left) → (in round 8, 12 st from the centre front line, toward the toy's left) → (between rounds 1 and 2, 1.5 st from the centre front line, toward the toy's left) → (between rounds 1 and 2, 1.5 st from the centre front line, toward the toy's right) → (in round 8, 12 st from the centre front line, toward the toy's right) → (in round 16, 22.5 st from the centre front line, toward the toy's right), catching it every 2–3 ch.
  • Fringe (on the scarf end): cut 7 pieces of yarn (scarf red) about 80 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 1, 3 st from the centre top line, toward the toy's left -> in round 1, on the centre top line -> in round 1, 3 st from the centre top line, toward the toy's right, evenly spaced. Trim to about 30 mm.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done