amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Big Polar Bear receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 138 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
3/3
Tempo
~12 h
Tamanho
33.4 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet polar bear pattern for a big, squishy cushion bear in red earmuffs and a candy-striped scarf. This amigurumi polar bear is snow white with an ivory muzzle, small round ears, rosy cheeks and a scarf end with a little fringe that hangs over its tummy. It is worked in the round in single crochet with bulky yarn and a 6 mm hook, ends up about 33 cm (13 in) tall, and uses 30 mm safety eyes; the ribbed scarf, earmuffs and chain headband, paws and feet are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see every piece - a cozy Christmas gift to hug all winter.

Como fazer Big Polar Bear de crochê

Avançado · 33 cm de altura · cerca de 12 h · fio bulky · agulha de 6 mm

  1. Faça as 16 partes em carreiras: Body, Scarf, Head, Muzzle, Earmuff ×2, Ear ×2, Scarf end, Front paw ×2, Foot ×2, Foot pad ×2, Tail (138 carreiras no total).
  2. Encha e monte em 11 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 11 separados

Mais como este

Todas as receitas de amigurumi urso →Todas as receitas de amigurumi urso-polar →Tudo em animais →
  • Prévia de Winnie-the-Pooh with a Honey Pot
    Gerador
    FazerRemix

    Winnie-the-Pooh with a Honey Pot

RemixFazer

Amostra

1 sc ≈ 7.5 mm wide, 1 round ≈ 6.8 mm tall (10 cm ≈ 13 sc × 15 rounds); yarn about 3.6 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 118 carreiras feitas

  23. Size before assembly: about 24.4 cm at the widest, 12.5 cm long; 25 rounds.
  24. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. Size before assembly: about 20.4 cm at the widest, 3.5 cm long; 3 rounds.
  5. Change to white (pull it through on the last yarn-over of R1).
  6. Change to scarf red (pull it through on the last yarn-over of R2).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  41. Size before assembly: about 26.3 cm at the widest, 20.4 cm long; 44 rounds.
  42. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  43. Press the piece flat to about 23.7 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: an oval about 11.6 × 7.1 cm at the widest, 3.1 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 3 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With ivory: ch 8.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  11. Size before assembly: about 7.6 cm at the widest, 5.7 cm long; 13 rounds.
  12. → Start stuffing (moderately) and keep adding as you decrease.
  13. Press the piece flat to about 4.6 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 7.5 cm at the widest, 2.8 cm long; 8 rounds.
  10. Change to snow white (pull it through on the last yarn-over of R3).
  11. → This piece is not stuffed.
  12. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–4 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 7.5 mm at the centre) and turn rounds 5–8 to the back: they make a thick rounded rim (about 15.1 mm thick) and lie behind as a second layer; the piece is about 75 mm across.<!-- (dish 50 %) -->

  7. Size before assembly: an oval about 4 × 1 cm at the widest, 7.4 cm long; 11 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With scarf red: ch 6.
  9. Change to white (pull it through on the last yarn-over of R2).
  10. Change to scarf red (pull it through on the last yarn-over of R4).
  11. Change to white (pull it through on the last yarn-over of R6).
  12. Change to scarf red (pull it through on the last yarn-over of R8).
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % --> Bend ≈ 60° around round 7<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 7, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 7 and 8 together.

  8. Size before assembly: about 5.1 cm at the widest, 4.9 cm long; 9 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 7.4 cm at the widest, 5 cm long; 10 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. A flat circle about 4.3 cm across; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Size before assembly: about 3.5 cm at the widest, 2.5 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 30 mm (on the head): in round 21, 16 st apart (count along round 21: about 7.9 st each side of the centre front line).
  • Satin stitch (on the muzzle): in nose black thread, a oval about 24 mm wide and 16 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in nose black thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in nose black thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's left ) → (in round 2, 2.5 st from the centre bottom line, toward the toy's left ).
  • Blush about 24 mm, dry pastel or blush (on the head, both sides): in round 24, 13 st from the centre front line, toward the toy's left . Colour blush pink.
  • Strap (on the head): with muff red, ch 50 (≈ 27.6 cm); for a firmer strap sl st back along it. Sew it along (in round 16, 22.5 st from the centre front line, toward the toy's left) → (in round 8, 12 st from the centre front line, toward the toy's left) → (between rounds 1 and 2, 1.5 st from the centre front line, toward the toy's left) → (between rounds 1 and 2, 1.5 st from the centre front line, toward the toy's right) → (in round 8, 12 st from the centre front line, toward the toy's right) → (in round 16, 22.5 st from the centre front line, toward the toy's right), catching it every 2–3 ch.
  • Fringe (on the scarf end): cut 7 pieces of yarn (scarf red) about 80 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 1, 3 st from the centre top line, toward the toy's left -> in round 1, on the centre top line -> in round 1, 3 st from the centre top line, toward the toy's right, evenly spaced. Trim to about 30 mm.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    pelo gerador de receitas
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Tigger the Bouncy Tiger
    Gerador
    FazerRemix

    Tigger the Bouncy Tiger

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Speedy Blue Hedgehog
    Gerador
    FazerRemix

    Speedy Blue Hedgehog

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de White Beagle with Black Ears
    Gerador
    FazerRemix

    White Beagle with Black Ears

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Grey Tabby Loaf Cat
    Gerador
    FazerRemix

    Grey Tabby Loaf Cat

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Confused Yellow Duck
    Gerador
    FazerRemix

    Confused Yellow Duck

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pudding Puppy in a Beret
    Gerador
    FazerRemix

    Pudding Puppy in a Beret

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Electric Yellow Mouse
    Gerador
    FazerRemix

    Electric Yellow Mouse

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Piglet in a Green Jumper
    Gerador
    FazerRemix

    Piglet in a Green Jumper

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Peter Rabbit in a Blue Jacket
    Gerador
    FazerRemix

    Peter Rabbit in a Blue Jacket

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Bunny in a Pink Hood
    Gerador
    FazerRemix

    Bunny in a Pink Hood

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Simple White Bunny in a Dress
    Gerador
    FazerRemix

    Simple White Bunny in a Dress

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done