amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Long-Legged Puppy modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 144 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~5 h
Taille
13.5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

This free crochet dog pattern makes a long-legged white puppy in a blue striped sweater, sitting with its legs stretched out and one paw raised in a wave. The amigurumi puppy tilts its head, with floppy brown ears, rosy cheeks, a red collar with a gold tag and blue-and-cream striped socks on its long tapered legs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, sits about 14 cm (5.5 in) tall, and has safety eyes and a safety nose and a separate sweater with a ribbed hem that holds the arms. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes.

Comment crocheter Long-Legged Puppy

Avancé · 14 cm de haut · environ 5 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 15 pièces en rangs : Body, Sweater, Collar, Head, Tag, Muzzle, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Tail (146 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

Dans le même genre

Tous les modèles d’amigurumi chien →Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 96

  16. Size before assembly: about 5.8 cm at the widest, 7.9 cm long; 24 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  12. Size before assembly: about 6.2 cm at the widest, 5.3 cm long; 13 rounds.
  13. Change to cream (pull it through on the last yarn-over of R5).
  14. Change to denim blue (pull it through on the last yarn-over of R6).
  15. Change to cream (pull it through on the last yarn-over of R8).
  16. Change to denim blue (pull it through on the last yarn-over of R9).
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Size before assembly: about 4.2 cm at the widest, 0.7 cm long; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  21. Size before assembly: about 7.3 cm at the widest, 5.9 cm long; 24 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Flat motif — circle (worked in rounds, one layer of fabric), about 1.5 × 1.5 cm; 2 rows.
  4. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  5. Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.5 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With snow white: ch 4.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  10. Size before assembly: about 3.6 cm at the widest, 4.6 cm long; 14 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.4 mm deep in front, a rounded back; about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 12<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 2 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 12, 1.5 st from the centre bottom line, toward the back <!-- st 1.31 back -->). If the ear sticks out, smooth it down along the head by hand.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  11. Size before assembly: about 1.6 cm at the widest, 7.5 cm long; 21 rounds.
  12. Change to cream (pull it through on the last yarn-over of R5).
  13. Change to denim blue (pull it through on the last yarn-over of R6).
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 55° around round 9<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 9, 1 st from the centre top line, toward the toy's right <!-- st 0.88 right -->). On the inner side draw rounds 8 and 10 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  17. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 9.5 cm long; 27 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  18. With denim blue: ch 4.
  19. Change to cream (pull it through on the last yarn-over of R5).
  20. Change to denim blue (pull it through on the last yarn-over of R7).
  21. Change to cream (pull it through on the last yarn-over of R9).
  22. Change to denim blue (pull it through on the last yarn-over of R11).
  23. Change to snow white (pull it through on the last yarn-over of R13).
  24. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 14<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 14, on the centre bottom line <!-- st 0.08 right -->). On the inner side draw rounds 13 and 15 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  6. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 7<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 7, on the centre top line). On the inner side draw rounds 6 and 8 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): between rounds 12 and 13, 9 st apart (count along round 12: about 4.5 st each side of the centre front line).
  • Safety nose, oval, 9×6.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose black #1f1b1a.
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in dark brown thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 2 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 4.5 mm wide and 4 mm tall, horizontal stitches; centred in round 3, on the centre bottom line.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done