amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Goose Keychain crochet pattern

  • Mathematically BalancedChecked by script: in all 85 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
2/3
Time
~2 h
Size
10.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet goose pattern: a Goose Keychain amigurumi, about 10 cm tall in fingering yarn with a 2 mm hook. It is a tiny white goose with an orange beak and feet, a raised eyebrow for a mischievous honk face and a silver ring on top of its head for your keys. You need about 65 m of yarn: 50 m white, 10 m orange and 5 m silver. Plan on roughly 2 hours. Hang it on your keys or bag as a cheeky little charm; it also makes a fun gift for goose lovers. Spin the 3D model and follow the round-by-round pattern to get the same tiny goose.

How to crochet the Goose Keychain

Intermediate · 10 cm tall · about 2 h · fingering yarn · 2 mm hook

  1. Crochet the 9 pieces in rounds: Body, Head and neck, Beak, Wing ×2, Tail, Foot ×2, Key ring loop (85 rounds in all).
  2. Stuff and put it together in 7 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 8 gathered

Gauge

RemixCrochet it

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 60 rounds done

  1. Size before assembly: about 5.7 cm at the widest, 6.5 cm long; 30 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4 cm at the widest, 5.9 cm long; 24 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 50° around round 15<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 15, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 13 to round 17, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Size before assembly: about 1.1 cm at the widest, 1.5 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.8 cm at the widest, 2.5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 55 % -->

  1. Size before assembly: about 1 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 5 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 1.4 cm at the widest, 1.7 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 85 % -->

  1. Size before assembly: about 1.5 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in silver (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the head and neck): between rounds 9 and 10, 9 st apart (count along round 9: about 4.4 st each side of the centre front line).
  • Blush about 9 mm, dry pastel or blush (on the head and neck, both sides): between rounds 11 and 12, 5 st from the centre front line, toward the toy's left . Colour rose.
  • Embroidery in black thread (on the head and neck), straight stitches through: (in round 7, 5 st from the centre front line, toward the toy's left ) → (between rounds 6 and 7, 4 st from the centre front line, toward the toy's left ) → (in round 7, 3 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the head and neck), straight stitches through: (in round 8, 6 st from the centre front line, toward the toy's right ) → (in round 8, 4.5 st from the centre front line, toward the toy's right ) → (between rounds 8 and 9, 3.5 st from the centre front line, toward the toy's right ).

Body · R1–R5

MR×××××××V×V×V××V××

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done