amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Mini Dachshund Keychain crochet pattern

  • Mathematically BalancedChecked by script: in all 82 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
2/3
Time
~2 h
Size
6.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A free crochet dog keychain pattern for a tiny long-bodied dachshund with soft drop ears and a round loop on its back for a key ring. This amigurumi dachshund is chocolate brown with a long tan snout, tan eyebrow dots, rosy cheeks and tan toes on four stubby legs. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, stands about 6 cm (2.5 in) tall and 12 cm (4.75 in) long, and has 7 mm safety eyes and a safety nose; the loop is a small doubled ring of single crochet sewn on by its edge. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to check every piece.

How to crochet the Mini Dachshund Keychain

Intermediate · 6 cm tall · about 2 h · fingering yarn · 2 mm hook

  1. Crochet the 13 pieces in rounds: Body, Head, Muzzle, Ear ×2, Cheek ×2, Leg ×4, Tail, Key ring loop (82 rounds in all).
  2. Stuff and put it together in 9 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 10 gathered

RemixCrochet it

Gauge

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 47 rounds done

  1. Size before assembly: about 3.1 cm at the widest, 8.4 cm long; 33 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.6 cm at the widest, 3.1 cm long; 16 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 1.9 × 1 cm at the widest, 2.1 cm long; 8 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With tan: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 2.5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.5 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 7<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 2 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 7, 1 st from the centre bottom line, toward the back <!-- st 0.79 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: front — 2 (left and right); hind — 2 (left and right). Size before assembly: about 0.9 cm at the widest, 1.2 cm long; 5 rounds.
  2. Change to choco (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.6 cm at the widest, 1.5 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in loop red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the head): between rounds 9 and 10, 7 st apart (count along round 9: about 3.3 st each side of the centre front line).
  • Safety nose, oval, 6×4.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose black #1f1b1a.
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in tan thread, a oval about 3.6 mm wide and 2.6 mm tall, horizontal stitches, turned 12° anticlockwise (looking at that surface); centred in round 7, 2.5 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done