amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Sea creatures

Shark in a Hoodie crochet pattern

  • Mathematically BalancedChecked by script: in all 93 rounds the increases and decreases add up to the stitch count.

by the pattern engineSea creatures

Difficulty
2/3
Time
~3 h
Size
11.1 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet shark pattern: a Shark in a Hoodie amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. Grey-blue shark face in a pink hood with a toothy grin, a grey fin on top and white drawstrings on the pink hoodie body. You need about 95 m of yarn: 55 m pink, 15 m dark pink, 15 m grey, 5 m white and 5 m light pink. Plan on roughly 3 hours. Pair it with a desk, a shelf or a pile of pillows as a cosy sea buddy, or give it to someone who loves sharks and soft pink hoodies. Spin the 3D model and follow the round-by-round pattern at your own pace.

How to crochet the Shark in a Hoodie

Intermediate · 11 cm tall · about 3 h · DK yarn · 2.5 mm hook

  1. Crochet the 12 pieces in rounds: Hoodie body, Head (hood), Hood trim, Shark face, Dorsal fin, Sleeve ×2, Hand fin, Tail fin, Pocket, Cheek ×2 (93 rounds in all).
  2. Stuff and put it together in 10 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 10 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 76 rounds done

  1. Size before assembly: about 6.6 cm at the widest, 4.1 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 9.4 × 6.6 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 8.7 × 5.9 cm; 8 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With grey: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  1. Size before assembly: about 2.1 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 70 % -->

  1. A flat oval about 5.3 × 3.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.6 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the shark face): in round 3, 15 st apart (count along round 3: about 7.6 st each side of the centre top line).
  • Satin stitch (on the shark face): in rose thread, a oval about 26 mm wide and 8 mm tall, horizontal stitches; centred in round 4, on the centre bottom line .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's right ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's left .

Hoodie body · R1–R5

MR××××××VVVVVV×V×V×

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done