amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Fantasy

Black Baby Dragon crochet pattern

  • Mathematically BalancedChecked by script: in all 96 rounds the increases and decreases add up to the stitch count.

by the pattern engineFantasy

Difficulty
3/3
Time
~4 h
Size
12.1 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A crochet amigurumi inspired by Toothless from How to Train Your Dragon: a black baby dragon with big green eyes, ear flaps, small wings and a tail fin. About 12 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by DreamWorks.

How to crochet the Black Baby Dragon

Advanced · 12 cm tall · about 4 h · DK yarn · 2.5 mm hook

  1. Crochet the 15 pieces in rounds: Body, Head, Ear flap ×2, Arm ×2, Leg ×2, Small ear flap ×2, Wing ×2, Tail, Tail fin, Red tail fin (120 rounds in all).
  2. Stuff and put it together in 10 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 8 gathered

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixCrochet it

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 89 rounds done

  1. Size before assembly: about 7.4 cm at the widest, 4.7 cm long; 17 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 30 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 4.4 cm long; 13 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 24 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Size before assembly: about 1.6 cm at the widest, 2.6 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 3.8 × 3 cm at the widest, 2.7 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With char: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.3 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 23 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 3.6 × 6.8 cm; 8 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 2.4 cm at the widest, 4.6 cm long; 13 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 9<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 9, 1.5 st from the centre top line, toward the toy's left <!-- st 1.51 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 11, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Flat motif — triangle (worked in turned rows, one layer of fabric), about 2.9 × 3.2 cm; 8 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Flat motif — triangle (worked in turned rows, one layer of fabric), about 2.9 × 3.2 cm; 8 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 20–24 mm (on the head): in round 17, 11 st apart (count along round 17: about 5.3 st each side of the centre front line). Iris iris #a9cf3c.
  • Embroidery in mouthc thread (on the head), straight stitches through: (between rounds 22 and 23, 2 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 1 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, on the centre front line) → (between rounds 23 and 24, 1 st from the centre front line, toward the toy's left ) → (between rounds 22 and 23, 2 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in mouthc thread, a oval about 2.5 mm wide and 2 mm tall, horizontal stitches; centred between rounds 20 and 21, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done