amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Cloud Puppy with Long Ears receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 87 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
2/3
Tempo
~3 h
Tamanho
9.7 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A crochet amigurumi inspired by Cinnamoroll from Sanrio: a white puppy with very long floppy ears, blue eyes and a cinnamon-roll tail. About 10 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Sanrio.

Como fazer Cloud Puppy with Long Ears de crochê

Intermediário · 10 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

  1. Faça as 11 partes em carreiras: Body, Head, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Curly tail (87 carreiras no total).
  2. Encha e monte em 7 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 7 separados

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixFazer

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 70 carreiras feitas

  1. Size before assembly: about 5.7 cm at the widest, 3.9 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.7 cm at the widest, 6.2 cm long; 27 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.4 cm at the widest, 9.2 cm long; 27 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4.6 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 44 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 27<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 27, 1 st from the centre bottom line, toward the back <!-- st 0.96 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 2.1 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 360° around round 3<!-- the bend spreads over 10 rounds --><!-- coil 2 -->. The piece rolls up into a spiral (about 1 turn) from round 3 to its end: after stuffing, roll it up starting from the last round (round 3) toward the side that faces up on the finished toy; the turns lie close, each wider than the last. From the last round back to round 3 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 16, 9 st apart (count along round 16: about 4.4 st each side of the centre front line). Colour eyeblue #7fb2f0.
  • Embroidery in mouth thread (on the head), straight stitches through: (in round 18, 1 st from the centre front line, toward the toy's right ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 1 st from the centre front line, toward the toy's left ).
  • Embroidery in swirl thread (on the curly tail), straight stitches through: (in round 1, on the centre top line ) → (in round 1, 0.5 st from the centre top line, toward the toy's left ) → (in round 1, 1 st from the centre top line, toward the toy's left ) → (in round 1, 1.5 st from the centre top line, toward the toy's left ) → (in round 1, 2 st from the centre top line, toward the toy's left ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 1, on the centre bottom line ) → (in round 1, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 1, 2 st from the centre top line, toward the toy's right ) → (in round 1, 1.5 st from the centre top line, toward the toy's right ) → (in round 1, 1 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's right ) → (between rounds 1 and 2, on the centre top line ) → (between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's left ) → (between rounds 1 and 2, 1 st from the centre top line, toward the toy's left ) → (in round 2, 3 st from the centre top line, toward the toy's left ) → (in round 2, 4 st from the centre top line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ) → (in round 2, 4 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 3 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 2 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 1 st from the centre top line, toward the toy's right) → (between rounds 2 and 3, on the centre top line ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done