amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Hedgehog in a Santa Hat Ornament receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 57 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
2/3
Tempo
~2 h
Tamanho
9.3 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet Christmas ornaments pattern for a round hazel-brown hedgehog in a red Santa hat with a pompom and a golden hanging loop. This amigurumi hedgehog has a cream face, a dark little nose, round ears and a back covered in short yarn fringe quills that make it look spiky and soft at once. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 9.3 cm (3.7 in) tall with the hat; the eyes are embroidered, the face, snout, ears, feet and hat are sewn on and the quills are knotted in. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

Como fazer Hedgehog in a Santa Hat Ornament de crochê

Intermediário · 9 cm de altura · cerca de 2 h · fio fingering · agulha de 2 mm

  1. Faça as 13 partes em carreiras: Head-body ball, Cream face, Museau, Nez, Oreille ×2, Joue ×2, Pied ×2, Santa hat, Pompon, Hanging loop (67 carreiras no total).
  2. Encha e monte em 10 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 13 separados

RemixFazer

Amostra

1 ms ≈ 3 mm de large, 1 tour ≈ 2,7 mm de haut (10 cm ≈ 33 ms × 37 tours) ; fil d’environ 1,4 mm d’épaisseur. L’échantillon détermine la taille du jouet ; crochetez serré pour que le rembourrage ne se voie pas.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 64 carreiras feitas

  1. Taille avant assemblage : environ 5,4 cm au plus large, 5,4 cm de long ; 26 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 6 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Un ovale plat d’environ 4,2 × 2,7 cm ; 5 tours. Crochetée autour d’une chaînette, elle est ovale : cousez-la avec le grand côté (le long de la chaînette) d’un côté à l’autre. Le marqueur de début de tour est au milieu d’un grand côté (ligne médiane de la pièce), alors que le T1 commence dans un virage : après le T1, décalez le début du tour — encore 2 ms (non comptées) et placez-y le marqueur. Les augmentations tombent dans les virages.
  2. En crème : 7 ml.
  3. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer.

  1. Taille avant assemblage : environ 1,2 cm au plus large, 0,9 cm de long ; 4 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Rembourrez légèrement juste avant de coudre ; un peu moins près du bord, puis ajoutez une pincée quand la couture est presque finie.

  1. Taille avant assemblage : environ 0,8 cm au plus large, 1 cm de long ; 4 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 4 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,7 cm au plus large, 0,9 cm de long ; 4 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer. Formez une coupelle : les tours 1–2 sont l’avant de la pièce, le cercle magique son centre. Enfoncez le centre pour creuser l’avant (environ 1,4 mm au centre) et retournez les tours 3–4 vers l’arrière : ils forment un bord épais et arrondi (environ 5,9 mm) et passent derrière en deuxième épaisseur ; la pièce mesure environ 17 mm de diamètre.

  1. Un cercle plat d’environ 1 cm de diamètre ; 2 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer.

  1. Taille avant assemblage : environ 0,8 cm au plus large, 0,7 cm de long ; 3 tours.
  2. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Rembourrez très légèrement et aplatissez à environ 4 mm d’épaisseur.

  1. Taille avant assemblage : environ 3 cm au plus large, 2,2 cm de long ; 10 tours.
  2. Passer en blanc (à faire au dernier jeté du T7).
  3. Arrêtez en laissant une longue aiguillée (30–40 cm) pour coudre. Ne pas rembourrer. Pliure ≈ 30° vers le tour 5. Pliez la pièce pour que l’intérieur de la pliure soit tourné vers l’arrière sur le jouet fini (sur la pièce : au tour 5, sur la ligne médiane arrière). Sur le côté intérieur, rapprochez les tours 4 et 6 (2 tours passent dans le pli) : avec l’aiguille et un fil assorti, faites 3–4 points dans les brins des deux tours sur environ 6 m, serrez jusqu’à l’angle et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,4 cm au plus large, 1,7 cm de long ; 7 tours.
  2. → Commencez à rembourrer (fermement) et continuez au fil des diminutions.
  3. Complétez le rembourrage si besoin. Arrêtez en laissant 15 cm de fil ; avec l’aiguille, passez-le dans les brins avant des 6 mailles du dernier tour, serrez et cachez le fil à l’intérieur.

  1. Taille avant assemblage : environ 1,5 cm au plus large (à plat) ; 2 tours. Chaque pièce est faite de deux cercles (devant et dos) : faites 2 cercles — 1 comme ci-dessous et 1 unis en doré (mêmes tours, sans changement de couleur).
  2. Arrêtez le fil. Superposez un devant et un cercle simple envers contre envers et faites le tour en ms à travers les deux épaisseurs : 16 ms. Ne pas rembourrer. Laissez une longue aiguillée (~30 cm) pour coudre.

Tout le visage est brodé. Ordre : les yeux (point de bourdon noir), puis les reflets blanc par-dessus, puis le nez et la bouche, le blush en dernier. Marquez d’abord les centres avec des épingles et comparez avec l’image. Faites sortir les fils là où une pièce cousue les cachera, ou enfouissez-les dans le rembourrage.

  • Yeux brodés (sur la pièce « cream face ») (2, symétrique : le côté gauche du jouet est décrit, le droit en miroir) : au fil noir, un ovale d’environ 4,4 mm de large et 5,2 mm de haut, points horizontaux ; centré entre les tours 2 et 3, à 3 m de la ligne médiane du dessus, vers le côté gauche du jouet.
  • Reflet de l’œil (sur la pièce « cream face ») (2, symétrique : le côté gauche du jouet est décrit, le droit en miroir) : au fil blanc par-dessus l’œil brodé, un ovale d’environ 1,8 mm de large et 1,8 mm de haut, points horizontaux ; centré entre les tours 2 et 3, à 3 m de la ligne médiane du dessus, vers le côté gauche du jouet, puis décalé de 0,8 mm vers la droite et 1,3 mm vers le haut (en regardant le visage du jouet).
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 9 and 10, 11 st from the centre front line, toward the toy’s left -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy’s left -> between rounds 9 and 10, on the centre back line -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy’s right -> between rounds 9 and 10, 11 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 14 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 11 and 12, 13 st from the centre front line, toward the toy’s left -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy’s left -> between rounds 11 and 12, on the centre back line -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy’s right -> between rounds 11 and 12, 13 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 13 and 14, 14.5 st from the centre front line, toward the toy’s left -> between rounds 13 and 14, 6 st from the centre back line, toward the toy’s left -> between rounds 13 and 14, on the centre back line -> between rounds 13 and 14, 6 st from the centre back line, toward the toy’s right -> between rounds 13 and 14, 14.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.

Head-body ball · T1–T5

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
  • Mane (on the head-body ball): cut 12 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 15 and 16, 14.5 st from the centre front line, toward the toy’s left -> between rounds 15 and 16, 6 st from the centre back line, toward the toy’s left -> between rounds 15 and 16, on the centre back line -> between rounds 15 and 16, 6 st from the centre back line, toward the toy’s right -> between rounds 15 and 16, 14.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 14 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 17 and 18, 13 st from the centre front line, toward the toy’s left -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy’s left -> between rounds 17 and 18, on the centre back line -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy’s right -> between rounds 17 and 18, 13 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 19 and 20, 11 st from the centre front line, toward the toy’s left -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy’s left -> between rounds 19 and 20, on the centre back line -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy’s right -> between rounds 19 and 20, 11 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along in round 21, 9.5 st from the centre front line, toward the toy’s left -> in round 21, 4 st from the centre back line, toward the toy’s left -> in round 21, on the centre back line -> in round 21, 4 st from the centre back line, toward the toy’s right -> in round 21, 9.5 st from the centre front line, toward the toy’s right, evenly spaced. Recoupez à environ 7 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 14 and 15, 11 st from the centre front line, toward the toy’s left -> between rounds 15 and 16, 13 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 17 and 18, 10 st from the centre front line, toward the toy’s left -> between rounds 18 and 19, 10.5 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy’s left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark’s head knot (pull through a stitch with the hook) along between rounds 20 and 21, 7.5 st from the centre front line, toward the toy’s left -> between rounds 21 and 22, 9 st from the centre front line, toward the toy’s left, evenly spaced. Recoupez à environ 6 mm.
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    CM
    cercle magique
    ms
    maille serrée
    aug
    augmentation : 2 ms dans la même maille
    dim
    diminution : 2 mailles écoulées ensemble en 1 ms (diminution invisible conseillée)
    BArr
    crocheter le tour dans le brin arrière uniquement
    BAv
    crocheter le tour dans le brin avant uniquement
    ml
    maille en l’air
    mc
    maille coulée
    m
    maille
    T5
    tour 5 ; T7–14 = les tours 7 à 14 sont identiques
    (…) ×6
    répéter 6 fois
    (24)
    mailles du tour une fois terminé