amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Cat in Shark Slippers Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 93 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~3 Std.
Größe
10.4 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet cat pattern: a Cat in Shark Slippers amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A grey cat with a white muzzle and happy closed eyes sits with its feet in two blue shark slippers that have fins, black eyes and white teeth. You need about 100 m of yarn: 50 m grey, 20 m blue, 10 m white, 5 m dark grey, 5 m dark blue, 5 m light pink and 5 m pink. Plan on roughly 3 hours. A silly little gift for cat owners and shark fans alike. Rotate the 3D model to see the slippers from every side, then crochet it round by round.

Cat in Shark Slippers häkeln

Fortgeschritten · 10 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Body, Head, Muzzle, Ear ×2, Front paw ×2, Shark slipper ×2, Fin ×2, Tail, Cheek ×2 (insgesamt 93 Runden).
  2. Fülle und montiere in 9 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 12 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 69 Runden fertig

  1. Size before assembly: about 5.9 cm at the widest, 3.5 cm long; 13 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.5 cm at the widest, 6.2 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R6).
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.5 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 4.7 × 3.9 cm at the widest, 4.3 cm long; 14 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With blue: ch 4.
  3. colours of round 1 in order: 2 sc in blue, 4 sc in white, 2 sc in blue
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Press the piece flat to about 3.1 cm thick (oval cross-section).<!-- press the piece flat by 35 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 16 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 60 % -->

  1. Size before assembly: about 1.3 cm at the widest, 6.4 cm long; 18 rounds.
  2. Change to grey (pull it through on the last yarn-over of R3).
  3. Change to dark grey (pull it through on the last yarn-over of R7).
  4. Change to grey (pull it through on the last yarn-over of R9).
  5. Change to dark grey (pull it through on the last yarn-over of R11).
  6. Change to grey (pull it through on the last yarn-over of R13).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 8, 1.5 st from the centre top line, toward the toy's left <!-- st 1.59 left -->). On the inner side draw rounds 6 and 9 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in dark brown thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 12 and 13, 2 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 4.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 6 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the muzzle): in hot pink thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre top line .
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in dark brown thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the shark slipper) (2: one on each shark slipper; the left one is described, the right is its mirror): in black thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 3, 2 st from the centre top line, toward the toy's left .
  • Satin stitch (on the left shark slipper): in dark pink thread, a oval about 12 mm wide and 3 mm tall, horizontal stitches; centred in round 1, on the centre bottom line .
  • Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 1 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 0.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 0.5 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 1 st from the centre bottom line, toward the toy's right .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done