Receita de Cat in Shark Slippers de crochê (PDF grátis)

R1with grey: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R8(BLO)42 sc(42)
R9–1342 sc(42)
Size before assembly: about 5.9 cm at the widest, 3.5 cm long; 13 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R32 sc, inc, 1 sc, inc, 5 sc, inc, 1 sc, inc, 1 sc(18)
R4–518 sc(18)
Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.5 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With white: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with grey: 4 sc in MR(4)
R2inc ×3, 1 sc(7)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(10)
R4[pink] 1 sc [grey] inc, 2 sc, inc, 2 sc, inc, 1 sc [pink] 1 sc(13)
R5[pink] 1 sc [grey] 2 sc, inc, 3 sc, inc, 4 sc [pink] 1 sc in same st, 1 sc(16)
R6[pink] 2 sc [grey] inc, 4 sc, inc, 4 sc, inc [pink] 3 sc(19)
R72 sc in pink, 14 sc in grey, 3 sc in pink(19)
Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.

R1with grey: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R3–410 sc(10)
R58 sc, dec(9)
Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with dark blue: 4 sc in MR(4)
R2inc ×4(8)
R3(1 sc, inc) ×4(12)
R412 sc(12)
Size before assembly: about 1.6 cm at the widest, 1.1 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

R1with dark grey: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
R4–710 sc(10)
R8–910 sc(10)
R10–1110 sc(10)
R12–1310 sc(10)
R14–1810 sc(10)
Size before assembly: about 1.3 cm at the widest, 6.4 cm long; 18 rounds.
Change to grey (pull it through on the last yarn-over of R3).
Change to dark grey (pull it through on the last yarn-over of R7).
Change to grey (pull it through on the last yarn-over of R9).
Change to dark grey (pull it through on the last yarn-over of R11).
Change to grey (pull it through on the last yarn-over of R13).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 8, 1.5 st from the centre top line, toward the toy's left ). On the inner side draw rounds 6 and 9 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

R1with light pink: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Embroidery in dark brown thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 12 and 13, 2 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 4.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 6 st from the centre front line, toward the toy's left ).
Satin stitch (on the muzzle): in hot pink thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre top line .
Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
Embroidery in dark brown thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
Satin stitch (on the shark slipper) (2: one on each shark slipper; the left one is described, the right is its mirror): in black thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 3, 2 st from the centre top line, toward the toy's left .
Satin stitch (on the left shark slipper): in dark pink thread, a oval about 12 mm wide and 3 mm tall, horizontal stitches; centred in round 1, on the centre bottom line .
Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 1 st from the centre bottom line, toward the toy's left .
Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 0.5 st from the centre bottom line, toward the toy's left .
Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 0.5 st from the centre bottom line, toward the toy's right .
Satin stitch (on the left shark slipper): in white thread, a triangle about 4.4 mm wide and 4.6 mm tall, horizontal stitches; centred in round 1, 1 st from the centre bottom line, toward the toy's right .