Receita de Goth Bat Bean fácil de crochê (PDF grátis)

R1starting in the 2nd ch from hook: sc 4, 3 sc in the last ch; continue along the other side of the chain: sc 3, 2 sc in the last ch (the one you made the first sc in)(12)
R2inc, 1 sc, inc, 1 sc, inc, 2 sc, inc, 1 sc, inc, 1 sc, inc(18)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 5 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(24)
R43 sc, inc, 1 sc, inc, 1 sc, inc, 8 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc(30)
R55 sc, inc, 1 sc, inc, 1 sc, inc, 11 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc(36)
R66 sc, inc, 1 sc, inc, 1 sc, inc, 14 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc(42)
R77 sc, inc, 1 sc, inc, 1 sc, inc, 17 sc, inc, 1 sc, inc, 1 sc, inc, 8 sc(48)
R89 sc, inc, 1 sc, inc, 1 sc, inc, 20 sc, inc, 1 sc, inc, 1 sc, inc, 9 sc(54)
R9–1354 sc(54)
R144 sc, (dec, 7 sc) ×5, dec, 3 sc(48)
R1548 sc(48)
R163 sc, (dec, 6 sc) ×5, dec, 3 sc(42)
R17(5 sc, dec) ×6(36)
R182 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R19(3 sc, dec) ×6(24)
R201 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R21(1 sc, dec) ×6(12)
R22dec ×6(6)
Size before assembly: an oval about 7.9 × 6.3 cm at the widest, 5.6 cm long; 22 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With black: ch 6.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Press the piece flat to about 7.1 cm thick (oval cross-section). Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Row 1with purple: into a magic ring; 3 sc(3)
Row 2ch 1 and turn (not counted as a st); inc ×3(6)
Row 3ch 1 and turn (not counted as a st); (1 sc, inc) ×3(9)
Row 4ch 1 and turn (not counted as a st); (1 sc, inc, 1 sc) ×3(12)
Row 5ch 1 and turn (not counted as a st); (3 sc, inc) ×3(15)
Row 6ch 1 and turn (not counted as a st); along the curved edge only (not along the straight edge); (1 sl st, point (ch 3, then back along the chain from the 2nd ch from hook: 1 sc, 1 hdc), skip 1 st, 2 sl st) ×3, 3 sl st(18)
Flat motif — half circle (worked in turned rows, one layer of fabric), about 2.5 × 4.5 cm; 6 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with black: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R39 sc(9)
R4(1 sc, dec) ×3(6)
Size before assembly: about 1.1 cm at the widest, 1.3 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with purple: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R35 sc, inc(7)
R47 sc(7)
R51 sc, dec, 1 sc, dec, 1 sc(5)
Size before assembly: about 0.9 cm at the widest, 1.7 cm long; 5 rounds.
→ Start stuffing (lightly) and keep adding as you decrease.
Press the piece flat to about 4 mm thick (oval cross-section). Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

R1with purple: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R36 sc(6)
R4(1 sc, dec) ×2(4)
Size before assembly: about 0.8 cm at the widest, 1.4 cm long; 4 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Felt (lilac), 2 ovals 13×13 mm (on the bean body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 15, 3.5 st from the centre front line, toward the toy's left .
Safety eyes 6 mm (on the bean body): between rounds 14 and 15, 7 st apart (count along round 14: about 3.3 st each side of the centre front line).
Embroidery in black thread (on the bean body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 16 and 17, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 3 st from the centre front line, toward the toy's left ) → (in round 16, 4 st from the centre front line, toward the toy's left ) → (in round 16, 5 st from the centre front line, toward the toy's left ).
Embroidery in lilac thread (on the bean body), straight stitches through: (between rounds 11 and 12, 1 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 1 st from the centre front line, toward the toy's left ).