Receita de Zen Capybara with Orange de crochê (PDF grátis)

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R842 sc(42)
R9(6 sc, inc) ×6(48)
R1048 sc(48)
R11(7 sc, inc) ×6(54)
R12–2254 sc(54)
R23(7 sc, dec) ×6(48)
R243 sc, (dec, 6 sc) ×5, dec, 3 sc(42)
Size before assembly: about 7.3 cm at the widest, 7.2 cm long; 24 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with dark brown: 4 sc in MR(4)
R2inc ×4(8)
R38 sc(8)
R41 sc, dec, 2 sc, dec, 1 sc(6)
Size before assembly: about 2.1 cm at the widest, 1.3 cm long; 4 rounds.
→ This piece is not stuffed.
Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 21 mm across.

R1with dark brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4(BLO)18 sc(18)
R5–918 sc(18)
Of these: front — 2 (left and right); back — 2 (left and right). Size before assembly: about 2.3 cm at the widest, 2.6 cm long; 9 rounds.
Change to brown (pull it through on the last yarn-over of R3).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with orange: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5–724 sc(24)
R81 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R9(1 sc, dec) ×6(12)
R10dec ×6(6)
Size before assembly: about 3 cm at the widest, 2.4 cm long; 10 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Round 1with green: ch 5 (foundation chain); starting in the 2nd ch from hook; 1 sc, 1 hdc, 1 sc, 3 sc in one st; along the other side of the chain; 1 sc, 1 hdc, 1 sc, picot (ch 3, sl st in the 3rd ch from hook); sl st in the first st to join(9)
Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 2 × 1.1 cm; 1 row.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with yellow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–518 sc(18)
R6(1 sc, dec) ×6(12)
R712 sc(12)
R8dec ×6(6)
Size before assembly: about 2.2 cm at the widest, 2.3 cm long; 8 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with teal: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
Size before assembly: about 1.6 cm at the widest, 0.7 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 1, 3 sc in the last ch; continue along the other side of the chain: sc 0, 2 sc in the last ch (the one you made the first sc in)(6)
R26 sc(6)
Size before assembly: an oval about 0.9 × 0.5 cm at the widest, 0.6 cm long; 2 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With beak: ch 3.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Embroidery in black thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 8, 8 st from the centre top line, toward the toy's left ) → (between rounds 8 and 9, 9.5 st from the centre top line, toward the toy's left ) → (in round 8, 10.5 st from the centre top line, toward the toy's left ).
Felt (pink), 2 ovals 7×5.5 mm (on the head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 7 and 8, 8.5 st from the centre top line, toward the toy's left .
Embroidery in black thread (on the head), straight stitches through: (in round 3, 1.5 st from the centre top line, toward the toy's left ) → (between rounds 2 and 3, on the centre top line ) → (in round 3, 1.5 st from the centre top line, toward the toy's right ).
Embroidery in black thread (on the head), straight stitches through: (between rounds 2 and 3, on the centre top line ) → (between rounds 4 and 5, on the centre top line ).