Classic Teddy Bear receita de crochê

Equilibrada matematicamenteVerificado por script: nas 90 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade: 3/3
Tempo: ~3 h
Tamanho: 13.1 cm
Esquisitice: 1/5

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet teddy bear pattern for a classic brown bear that sits on its own, with round ears, a cream muzzle and a red bow at the neck. This amigurumi teddy has shiny safety eyes, an embroidered nose and smile, cream pads on its paws and feet, and soft rosy cheeks. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook: the head, body, muzzle, dish-shaped ears, arms, legs and tail are made separately and sewn together, and it ends up about 13 cm (5 in) tall. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece and the two-loop bow go.

Como fazer Classic Teddy Bear de crochê

Avançado · 13 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

Faça as 15 partes em carreiras: Body, Head, Muzzle, Ear ×2, Arm ×2, Leg ×2, Foot pad ×2, Tail, Bow loop ×2, Bow knot (90 carreiras no total).
Encha e monte em 10 etapas; cada uma acende no modelo 3D onde a parte vai.
Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 8 separados

Fio brownespessura DK75 m
Fio tanespessura DK10 m
Fio redespessura DK5 m
Agulha de crochêde 2.5 mm1
Olhos de segurançaou borde-os para crianças pequenas2
Enchimentofibra siliconada30 g
Marcador de pontospara carreiras em espiral1
Agulha de tapeçariapara costurar as partes1

Todas as receitas de amigurumi ursinho de pelúcia →Tudo em animais →

Gerador
Winnie-the-Pooh with a Honey Pot
pelo gerador de receitas

Remix Fazer

0 de 72 carreiras feitas

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R4–520 sc(20)
Size before assembly: an oval about 3 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With tan: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with tan: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R418 sc(18)
R5(1 sc, dec) ×6(12)
R6dec ×6(6)
Size before assembly: about 3.3 cm at the widest, 1.5 cm long; 6 rounds.
Change to brown (pull it through on the last yarn-over of R2).
→ This piece is not stuffed.
Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–3 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 3.1 mm at the centre) and turn rounds 4–6 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 33 mm across.

R1with tan: 6 sc in MR(6)
R2[tan] inc [brown] inc ×4 [tan] inc(12)
R3[tan] 2 sc [brown] 1 sc, inc, 3 sc, inc, 3 sc [tan] inc(15)
R4–615 sc(15)
R7(3 sc, dec) ×3(12)
R8–1012 sc(12)
R11(4 sc, dec) ×2(10)
Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy).
colours of round 1 in order: 1 sc in tan, 4 sc in brown, 1 sc in tan
Change to brown (pull it through on the last yarn-over of R3).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5–824 sc(24)
R9(6 sc, dec) ×3(21)
R103 sc, (dec, 5 sc) ×2, dec, 2 sc(18)
R1118 sc(18)
Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with tan: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
A flat circle about 2.3 cm across; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R42 sc, dec, 4 sc, dec, 2 sc(10)
Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 1, 3 sc in the last ch; continue along the other side of the chain: sc 0, 2 sc in the last ch (the one you made the first sc in)(6)
R2(inc ×2, 1 sc) ×2(10)
R3inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc(14)
A flat oval about 2.6 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 3.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R21 sc, inc, 4 sc, inc, 1 sc(10)
A flat oval about 2.3 × 1.5 cm; 2 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running vertically, top to bottom. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 12 mm (on the head): in round 15, 9 st apart (count along round 15: about 4.3 st each side of the centre front line).
Satin stitch (on the muzzle): in dark thread, a oval about 9 mm wide and 6 mm tall, horizontal stitches; centred in round 1, on the centre top line .
Embroidery in dark thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
Embroidery in dark thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1.5 st from the centre bottom line, toward the toy's left ).
Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 18, 7.5 st from the centre front line, toward the toy's left . Colour blush.