Receita de Duck in Sunglasses de crochê (PDF grátis)

R1with yellow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R104 sc, (inc, 8 sc) ×5, inc, 4 sc(60)
R11–1460 sc(60)
R15(8 sc, dec) ×6(54)
R1654 sc(54)
R17(7 sc, dec) ×6(48)
R1848 sc(48)
R19(6 sc, dec) ×6(42)
R2042 sc(42)
R21(6 sc, inc) ×6(48)
R2248 sc(48)
R23(7 sc, inc) ×6(54)
R2454 sc(54)
R25(8 sc, inc) ×6(60)
R26–2860 sc(60)
R29(BLO)60 sc(60)
R304 sc, (dec, 8 sc) ×5, dec, 4 sc(54)
R31(7 sc, dec) ×6(48)
R323 sc, (dec, 6 sc) ×5, dec, 3 sc(42)
R33(5 sc, dec) ×6(36)
R342 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R35(3 sc, dec) ×6(24)
R361 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R37(1 sc, dec) ×6(12)
R38dec ×6(6)
Size before assembly: about 8 cm at the widest, 10.9 cm long; 38 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1starting in the 2nd ch from hook: sc 4, 3 sc in the last ch; continue along the other side of the chain: sc 3, 2 sc in the last ch (the one you made the first sc in)(12)
R21 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc(16)
R32 sc, inc, 1 sc, inc, 6 sc, inc, 1 sc, inc, 2 sc(20)
R4–520 sc(20)
Size before assembly: an oval about 3.3 × 1.7 cm at the widest, 1.6 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With orange: ch 6.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

R1with yellow: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R510 sc(10)
Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

R1starting in the 2nd ch from hook: sc 5, 3 sc in the last ch; continue along the other side of the chain: sc 4, 2 sc in the last ch (the one you made the first sc in)(14)
R22 sc, inc, 1 sc, inc, 5 sc, inc, 1 sc, inc, 1 sc(18)
R32 sc, inc, 1 sc, inc, 7 sc, inc, 1 sc, inc, 3 sc(22)
R422 sc(22)
A flat oval about 4.9 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running front to back. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With yellow: ch 7.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc(14)
R32 sc, inc, 1 sc, inc, 5 sc, inc, 1 sc, inc, 1 sc(18)
R418 sc(18)
Size before assembly: an oval about 2.9 × 1.7 cm at the widest, 1.2 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With orange: ch 5.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.

R1with blush pink: 5 sc in MR(5)
R2inc ×5(10)
A flat circle about 1.4 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with black: 6 sc in MR(6)
R2inc ×6(12)
R3(5 sc, inc) ×2(14)
R414 sc(14)
A flat circle about 3.1 cm across; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with red: ch 44 and join into a ring with a sl st in the first ch (do not twist); 44 sc, one in each ch of the ring(44)
R2–3(ribbing)(fpdc, bpdc) ×22(44)
Size before assembly: about 5.6 cm at the widest, 1.8 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2–88 sc(8)
Size before assembly: an oval about 1.3 × 0.5 cm at the widest, 2.8 cm long; 8 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together. Bend ≈ 75° around round 6. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Embroidery in black thread (on the body with head), straight stitches through: (in round 12, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, on the centre front line ) → (between rounds 11 and 12, 0.5 st from the centre front line, toward the toy's left ) → (in round 12, 1.5 st from the centre front line, toward the toy's left ).
Embroidery in black thread (on the body with head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 12, 8.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 10.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 12.5 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 14.5 st from the centre front line, toward the toy's left ).
Satin stitch (on the body with head) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread in several layers so it stands out, a oval about 3 mm wide and 6 mm tall, horizontal stitches; centred in round 11, 5 st from the centre front line, toward the toy's left .
Embroidery in black thread (on the body with head), straight stitches through: (in round 9, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 8 and 9, 3 st from the centre front line, toward the toy's left ) → (between rounds 8 and 9, 4.5 st from the centre front line, toward the toy's left ) → (in round 9, 5.5 st from the centre front line, toward the toy's left ).