Receita de Duckling in Rain Boots de crochê (PDF grátis)

R1with yellow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R842 sc(42)
R9(6 sc, inc) ×6(48)
R1048 sc(48)
R11(7 sc, inc) ×6(54)
R12–1854 sc(54)
R19(7 sc, dec) ×6(48)
R2048 sc(48)
R21(6 sc, dec) ×6(42)
R2242 sc(42)
R23(5 sc, dec) ×6(36)
R242 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R25(3 sc, dec) ×6(24)
R261 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R27(1 sc, dec) ×6(12)
R28dec ×6(6)
Size before assembly: about 7.4 cm at the widest, 7.4 cm long; 28 rounds.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with yellow: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R3(3 sc, inc) ×2(10)
R4–510 sc(10)
R61 sc, dec, 1 sc, dec, 1 sc, dec, 1 sc(7)
R7dec ×3, 1 sc(4)
Size before assembly: about 1.3 cm at the widest, 2.2 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %). Bend ≈ 70° around round 3. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 2.5 st from the line on the toy's left side, toward the back). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

R1with orange: 6 sc in MR(6)
R2inc ×6(12)
R3(3 sc, inc) ×3(15)
R415 sc(15)
Size before assembly: about 2 cm at the widest, 1.1 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 9 mm thick.

R1with yellow: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R33 sc, inc, 3 sc, inc, 1 sc(11)
R411 sc(11)
R51 sc, dec, 1 sc, dec, 2 sc, dec, 1 sc(8)
Size before assembly: about 1.4 cm at the widest, 1.6 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4(BLO)18 sc(18)
R5–718 sc(18)
R818 sc(18)
R9(4 sc, dec) ×3(15)
Size before assembly: about 2.4 cm at the widest, 2.8 cm long; 9 rounds.
Change to red (pull it through on the last yarn-over of R2).
Change to white (pull it through on the last yarn-over of R7).
Change to red (pull it through on the last yarn-over of R8).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with brown: 5 sc in MR(5)
R2–205 sc(5)
Size before assembly: about 0.7 cm at the widest, 7.1 cm long; 20 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 9 mm (on the ball body with head): between rounds 17 and 18, 8 st apart (count along round 17: about 4.2 st each side of the centre front line).