Receita de Panda Ball fácil de crochê (PDF grátis)

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R1054 sc(54)
R11(8 sc, inc) ×6(60)
R12–1760 sc(60)
R184 sc, (dec, 8 sc) ×5, dec, 4 sc(54)
R1954 sc(54)
R204 sc, (dec, 7 sc) ×5, dec, 3 sc(48)
R21(6 sc, dec) ×6(42)
R223 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R23(4 sc, dec) ×6(30)
R242 sc, (dec, 3 sc) ×5, dec, 1 sc(24)
R25(2 sc, dec) ×6(18)
R26(1 sc, dec) ×6(12)
R27dec ×6(6)
Size before assembly: about 8.3 cm at the widest, 6.5 cm long; 27 rounds.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with black: 5 sc in MR(5)
R2inc ×5(10)
R3–410 sc(10)
R5(3 sc, dec) ×2(8)
Size before assembly: about 2.3 cm at the widest, 1.5 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.7 mm at the centre) and turn rounds 3–5 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 23 mm across.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(22)
A flat oval about 3.4 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With black: ch 5.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with black: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–59 sc(9)
R64 sc, dec, 3 sc(8)
Size before assembly: about 1.2 cm at the widest, 2 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with black: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R3–410 sc(10)
Size before assembly: about 1.3 cm at the widest, 1.3 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 8 mm (on the panda ball): between rounds 18 and 19, 8 st apart (count along round 18: about 3.9 st each side of the centre front line).
Satin stitch (on the panda ball): in black thread, a triangle about 6 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 16 and 17, on the centre front line .
Embroidery in black thread (on the panda ball), straight stitches through: (between rounds 16 and 17, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 2 st from the centre front line, toward the toy's right ).
Embroidery in black thread (on the panda ball), straight stitches through: (between rounds 16 and 17, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 2 st from the centre front line, toward the toy's left ).