Receita de Husky Puppy de crochê (PDF grátis)

R1with snow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7[snow] 5 sc, inc [husky] 5 sc, inc, 5 sc, inc, 5 sc, inc, 6 sc [snow] 1 sc in same st, 5 sc, inc(42)
R8[snow] 3 sc, inc, 2 sc [husky] 4 sc, (inc, 6 sc) ×3, inc, 2 sc [snow] 4 sc, inc, 3 sc(48)
R9[snow] 8 sc [husky] 1 sc in same st, 7 sc, inc, 7 sc, inc, 7 sc, inc, 8 sc [snow] 1 sc in same st, 7 sc, inc(54)
R10[snow] 4 sc, inc, 3 sc [husky] 5 sc, (inc, 8 sc) ×3, inc, 3 sc [snow] 5 sc, inc, 4 sc(60)
R11–139 sc in snow, 40 sc in husky, 11 sc in snow(60)
R14–158 sc in snow, 41 sc in husky, 11 sc in snow(60)
R167 sc in snow, 42 sc in husky, 11 sc in snow(60)
R17[snow] 6 sc [husky] 2 sc, dec, 8 sc, dec, 8 sc, dec, 8 sc, dec, 8 sc, dec [snow] 8 sc, dec(54)
R18[snow] 4 sc, dec [husky] 7 sc, dec, 7 sc, dec, 7 sc, dec, 7 sc, dec, 3 sc [snow] 4 sc, dec, 3 sc(48)
R195 sc in snow, 35 sc in husky, 8 sc in snow(48)
R20[snow] 3 sc, dec [husky] 6 sc, dec, 6 sc, dec, 6 sc, dec, 6 sc, dec, 3 sc [snow] 3 sc, dec, 3 sc(42)
R213 sc in snow, 31 sc in husky, 8 sc in snow(42)
R22[snow] 3 sc [husky] dec, 5 sc, dec, 5 sc, dec, 5 sc, dec, 5 sc, dec, 1 sc [snow] 4 sc, dec, 2 sc(36)
R23[snow] 2 sc [husky] 2 sc, dec, 4 sc, dec, 4 sc, dec, 4 sc, dec, 4 sc [snow] dec, 4 sc, dec(30)
R24[snow] 1 sc [husky] 1 sc, dec, 3 sc, dec, 3 sc, dec, 3 sc, dec, 3 sc, dec [snow] 3 sc, dec, 1 sc(24)
R25[husky] 2 sc, dec, 2 sc, dec, 2 sc, dec, 2 sc, dec, 1 sc [snow] 1 sc, dec, 2 sc, dec(18)
R26[husky] (1 sc, dec) ×4 [snow] 1 sc, dec, 1 sc [husky] dec(12)
R27dec ×6(6)
Size before assembly: about 8.2 cm at the widest, 6.7 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with snow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R524 sc(24)
Size before assembly: about 3.3 cm at the widest, 1 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with husky: 4 sc in MR(4)
R2inc ×3, 1 sc(7)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(10)
R41 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc(13)
R5[husky] (3 sc, inc) ×3 [pinkear] 1 sc(16)
R6[pinkear] 1 sc [husky] 1 sc, inc, 4 sc, inc, 4 sc, inc, 1 sc [pinkear] 2 sc(19)
R7[pinkear] 2 sc [husky] 3 sc, inc, 5 sc, inc, 5 sc [pinkear] inc, 1 sc(22)
R8[pinkear] 2 sc [husky] 1 sc, inc, 6 sc, inc, 6 sc, inc [pinkear] 4 sc(25)
R9–102 sc in pinkear, 19 sc in husky, 4 sc in pinkear(25)
Size before assembly: about 4.4 cm at the widest, 3.1 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 5.1 mm deep in front, a rounded back; about 44 mm wide. Keep the opening a curve, hollow side forward, not a straight line.

R1with blush: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with snow: 6 sc in MR(6)
R2inc ×6(12)
R3–412 sc(12)
R5(4 sc, dec) ×2(10)
R610 sc(10)
Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with snow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–718 sc(18)
R8–2918 sc(18)
Size before assembly: about 2.4 cm at the widest, 10.5 cm long; 29 rounds.
Change to husky (pull it through on the last yarn-over of R7).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 420° around round 24. The tail rolls up into a spiral (about 1.2 turns): after stuffing, roll it up from the tip (round 1) toward the side that faces backward on the finished toy; the turns lie close, each wider than the last. From the tip to round 24 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 14 mm (on the head): in round 17, 9 st apart (count along round 17: about 4.4 st each side of the centre front line). Iris ice #6fb8e6.
Safety nose, triangle, 10×7.5 mm (on the muzzle): in round 1, on the centre top line . Colour nose #1c1a1a.
Embroidery in nose thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (between rounds 2 and 3, on the centre bottom line ).
Satin stitch (on the muzzle): in tongue thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred in round 3, on the centre bottom line.
Embroidery in nose thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 10 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's left .
Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 10 mm tall, horizontal stitches; centred in round 4, on the centre bottom line.
Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 10 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's right .
Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in snow thread, a oval about 8 mm wide and 5.5 mm tall, horizontal stitches, turned 10° anticlockwise (looking at that surface); centred in round 13, 4 st from the centre front line, toward the toy's left .