Receita de Stocking with a Teddy Ornament fácil de crochê (PDF grátis)

R1with snow: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R6–1230 sc(30)
R13(3 sc, dec) ×6(24)
R14–1924 sc(24)
R202 sc, (inc, 3 sc) ×5, inc, 1 sc(30)
R21–2330 sc(30)
R24(popcorns)(2 sc, popcorn) ×10(30)
Size before assembly: about 3 cm at the widest, 5.9 cm long; 24 rounds.
Change to red (pull it through on the last yarn-over of R3).
Change to snow (pull it through on the last yarn-over of R19).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 90° around round 12. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 12, on the centre top line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 8 to round 16, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 8 rounds) and fasten off inside.

R1with honey: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
R4(dec ×2, 1 sc) ×2(6)
Size before assembly: about 0.9 cm at the widest, 1.1 cm long; 4 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with gold: ch 16 and join into a ring with a sl st in the first ch (do not twist); 16 sc, one in each ch of the ring(16)
R216 sc(16)
Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Round 1with holly: ch 6 (foundation chain); starting in the 2nd ch from hook; 1 sc, 2 hdc, 1 sc, 3 sc in one st; along the other side of the chain; 1 sc, 2 hdc, 1 sc, picot (ch 3, sl st in the 3rd ch from hook); sl st in the first st to join(11)
Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.9 × 0.8 cm; 1 row.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with tan: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R4dec ×6(6)
Size before assembly: about 1.9 cm at the widest, 1 cm long; 4 rounds.
Change to honey (pull it through on the last yarn-over of R1).
→ This piece is not stuffed.
Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 1.6 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 19 mm across.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R3–414 sc(14)
Size before assembly: an oval about 1.6 × 1 cm at the widest, 0.9 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With tan: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 5–6 mm (on the teddy head): in round 9, 6 st apart (count along round 9: about 3 st each side of the centre front line).
Satin stitch (on the muzzle): in charcoal thread, a oval about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred in round 1, on the centre top line .
Embroidery in charcoal thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, on the centre bottom line ).
Embroidery in charcoal thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's left ).