Receita de Panda with Heart Eyes and Balloon de crochê (PDF grátis)

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9–1048 sc(48)
R11–1448 sc(48)
R15(6 sc, dec) ×6(42)
R163 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R17(4 sc, dec) ×6(30)
R1830 sc(30)
Size before assembly: about 6.6 cm at the widest, 5 cm long; 18 rounds.
Change to black (pull it through on the last yarn-over of R10).
Change to white (pull it through on the last yarn-over of R17).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with black: 5 sc in MR(5)
R2inc ×5(10)
R3–410 sc(10)
R5(3 sc, dec) ×2(8)
Size before assembly: about 2.3 cm at the widest, 1.5 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.7 mm at the centre) and turn rounds 3–5 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 23 mm across.

Round 1with black: into a magic ring; ch 3 (the first post, not counted); 3 tr, 3 dc, ch 1, 1 tr, ch 1, 3 dc, 3 tr; ch 3 and sl st into the ring, then pull the ring tight(13)
Round 2starting with the first tr, work into the stitches only (not into the ch-3 posts or the ch-1 spaces); 1 sc, inc, 1 sc, inc, 2 sc, 3 sc in one st, 2 sc, inc, 1 sc, inc, 1 sc; sl st in the first st to join(19)
Flat motif — heart (worked in rounds, one layer of fabric), about 2.8 × 2.8 cm; 2 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with black: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–109 sc(9)
R117 sc, dec(8)
Size before assembly: about 1.2 cm at the widest, 3.9 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with black: 6 sc in MR(6)
R2inc ×6(12)
R3–612 sc(12)
R7dec ×6(6)
Size before assembly: about 1.7 cm at the widest, 2.3 cm long; 7 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with cream: 3 sc in MR(3)
R2–353 sc(3)
Size before assembly: about 0.4 cm at the widest, 12.4 cm long; 35 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 28° around round 10. Bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 10, on the centre front line ). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 10 and 11 together.

Round 1with red: into a magic ring; ch 3 (the first post, not counted); 3 tr, 3 dc, ch 1, 1 tr, ch 1, 3 dc, 3 tr; ch 3 and sl st into the ring, then pull the ring tight(13)
Round 2starting with the first tr, work into the stitches only (not into the ch-3 posts or the ch-1 spaces); 1 sc, inc, 1 sc, inc, 2 sc, 3 sc in one st, 2 sc, inc, 1 sc, inc, 1 sc; sl st in the first st to join(19)
Round 32 sc, inc, 2 sc, inc, 3 sc, 3 sc in one st, 3 sc, inc, 2 sc, inc, 2 sc; sl st in the first st to join(25)
Round 43 sc, inc, 3 sc, inc, 4 sc, 3 sc in one st, 4 sc, inc, 3 sc, inc, 3 sc; sl st in the first st to join(31)
Round 54 sc, inc, 3 sc, inc, 6 sc, 3 sc in one st, 6 sc, inc, 3 sc, inc, 4 sc; sl st in the first st to join(37)
Flat motif — heart (worked in rounds, one layer of fabric), about 4.8 × 5 cm; 5 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 8 mm (on the head): in round 17, 9 st apart (count along round 17: about 4.7 st each side of the centre front line).
Satin stitch (on the head): in black thread, a triangle about 6 mm wide and 4.2 mm tall, horizontal stitches; centred in round 19, on the centre front line .
Embroidery in black thread (on the head), straight stitches through: (in round 20, on the centre front line ) → (in round 21, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 21 and 22, 1 st from the centre front line, toward the toy's right ).
Embroidery in black thread (on the head), straight stitches through: (in round 20, on the centre front line ) → (in round 21, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 21 and 22, 1 st from the centre front line, toward the toy's left ).