Receita de Penguin Couple in One Scarf de crochê (PDF grátis)

R1with white: 6 sc in MR(6)
R2[white] inc, 1 sc [black] 1 sc in same st, inc ×2, 1 sc [white] 1 sc in same st, inc(12)
R3[white] 1 sc, inc, 1 sc [black] inc, 1 sc, inc, 1 sc, inc, 2 sc [white] 1 sc in same st, 1 sc, inc(18)
R4[white] 1 sc, inc, 1 sc [black] 1 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc, inc [white] 2 sc, inc, 1 sc(24)
R5[white] 3 sc, inc [black] 3 sc, inc, 3 sc, inc, 3 sc, inc, 4 sc [white] 1 sc in same st, 3 sc, inc(30)
R6[white] 2 sc, inc, 2 sc [black] 2 sc, inc, 4 sc, inc, 4 sc, inc, 4 sc, inc, 1 sc [white] 3 sc, inc, 2 sc(36)
R7[white] 5 sc, inc [black] 5 sc, inc, 5 sc, inc, 5 sc, inc, 6 sc [white] 1 sc in same st, 5 sc, inc(42)
R8[white] 3 sc, inc, 3 sc [black] 3 sc, inc, 6 sc, inc, 6 sc, inc, 6 sc, inc, 1 sc [white] 5 sc, inc, 3 sc(48)
R98 sc in white, 31 sc in black, 9 sc in white(48)
R10–127 sc in white, 32 sc in black, 9 sc in white(48)
R13–166 sc in white, 33 sc in black, 9 sc in white(48)
R175 sc in white, 34 sc in black, 9 sc in white(48)
R18[white] 3 sc, dec [black] 6 sc, dec, 6 sc, dec, 6 sc, dec, 6 sc, dec, 2 sc [white] 4 sc, dec, 3 sc(42)
R19(5 sc, dec) ×6(36)
R2036 sc(36)
R21(5 sc, inc) ×6(42)
R22–2642 sc(42)
R27(5 sc, dec) ×6(36)
R282 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R29(3 sc, dec) ×6(24)
R301 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R31(1 sc, dec) ×6(12)
R32dec ×6(6)
Size before assembly: about 6.8 cm at the widest, 9.5 cm long; 32 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
colours of round 1 in order: 1 sc in white, 3 sc in black, 2 sc in white
Change to black (pull it through on the last yarn-over of R18).
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with orange: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R38 sc(8)
Of these: on the tall penguin — 1; on the small penguin — 1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %).

R1with black: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R3–88 sc(8)
R9(2 sc, dec) ×2(6)
Of these: on the tall penguin — 1; on the small penguin — 1. Size before assembly: about 1 cm at the widest, 3 cm long; 9 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.

R1with orange: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
Size before assembly: about 1.4 cm at the widest, 0.9 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

R1with yellow: 5 sc in MR(5)
R2inc ×4, 1 sc(9)
A flat circle about 1.4 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with pink: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with red: ch 36 and join into a ring with a sl st in the first ch (do not twist); 36 sc, one in each ch of the ring(36)
R2–436 sc(36)
Size before assembly: about 4.6 cm at the widest, 1.5 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with red: ch 30 and join into a ring with a sl st in the first ch (do not twist); 30 sc, one in each ch of the ring(30)
R2–430 sc(30)
Size before assembly: about 3.8 cm at the widest, 1.4 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with red: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3(2 sc, inc) ×3(12)
R4–612 sc(12)
Size before assembly: about 1.6 cm at the widest, 2 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 5 mm thick.

R1with red: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3(2 sc, inc) ×3(12)
R4–612 sc(12)
R7–812 sc(12)
R9–1212 sc(12)
R13–1412 sc(12)
R1512 sc(12)
R161 sc, (dec, 2 sc) ×2, dec, 1 sc(9)
Size before assembly: about 1.6 cm at the widest, 5.5 cm long; 16 rounds.
Change to white (pull it through on the last yarn-over of R6).
Change to red (pull it through on the last yarn-over of R8).
Change to white (pull it through on the last yarn-over of R12).
Change to red (pull it through on the last yarn-over of R14).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 12 mm (on the tall penguin): between rounds 25 and 26, 7 st apart (count along round 25: about 3.5 st each side of the centre front line).
Embroidery in black thread (on the small penguin) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 20 and 21, 2 st from the centre front line, toward the toy's left ) → (between rounds 21 and 22, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 20 and 21, 3 st from the centre front line, toward the toy's left ).