amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Plants

Succulent Trio in a Long Pot crochet pattern

  • Mathematically BalancedChecked by script: in all 112 rounds the increases and decreases add up to the stitch count.

by the pattern enginePlants

Difficulty
3/3
Time
~4 h
Size
10.6 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet succulents pattern: a Succulent Trio in a Long Pot amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. A sleepy cactus with a pink flower, a sage-green rosette with wide eyes and a winking lime aloe share one long butter-yellow pot, and a tiny ladybug sits on the soil in front. You need about 120 m of yarn: 25 m sage, 20 m each of green, lime and butter yellow, 10 m cream and 5 m each of brown, red, pink, black and dusty pink. Plan on roughly 4 hours. Three friendly plants in one pot make a tidy gift for a plant-loving friend or a no-care centrepiece for a desk or windowsill. Spin the 3D model and follow the round-by-round pattern to make each plant.

How to crochet the Succulent Trio in a Long Pot

Advanced · 11 cm tall · about 4 h · DK yarn · 2.5 mm hook

  1. Crochet the 19 pieces in rounds: Rectangular pot, Cactus, Cactus arm ×2, Flower, Rosette ball, Aloe, Rosette petal ×5, Aloe leaf ×2, Cheek ×2, Ladybug, Bug spot ×2 (112 rounds in all).
  2. Stuff and put it together in 13 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 15 gathered

More like this

All plants →
  • Preview of Baby Tree Creature in a Pot
    Engine
    Crochet itRemix

    Baby Tree Creature in a Pot

    by the pattern engine

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 80 rounds done

  17. Size before assembly: an oval about 10.7 × 5.1 cm at the widest, 4.5 cm long; 18 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 7 more (not counted in any round) and place the marker there. The increases fall on the turns.
  18. With butter yellow: ch 16.
  19. Change to cream (pull it through on the last yarn-over of R9).
  20. Change to butter yellow (pull it through on the last yarn-over of R12).
  21. Change to brown (pull it through on the last yarn-over of R13).
  22. → Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  11. Size before assembly: about 4.2 cm at the widest, 6.4 cm long; 21 rounds.
  12. → Start stuffing (firmly) and keep adding as you decrease.
  13. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.3 cm at the widest, 2.7 cm long; 8 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  15. Size before assembly: about 5.6 cm at the widest, 4.1 cm long; 18 rounds.
  16. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
  17. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  13. Size before assembly: about 4.1 cm at the widest, 4.8 cm long; 16 rounds.
  14. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  15. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. Of these: front — 1; side — 2 (left and right); back — 2 (left and right). Size before assembly: about 1.3 cm at the widest, 2.7 cm long; 8 rounds.
  8. → Start stuffing (lightly) and keep adding as you decrease.
  9. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 1.8 cm at the widest, 4.1 cm long; 12 rounds.
  10. → Start stuffing (lightly) and keep adding as you decrease.
  11. Press the piece flat to about 1.1 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 1.3 cm at the widest, 1.7 cm long; 5 rounds.
  6. → Start stuffing (lightly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1.3 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Embroidery in dark brown thread (on the cactus) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 17 and 18, 1 st from the centre front line, toward the toy's left) → (in round 17, 1.5 st from the centre front line, toward the toy's left ) → (in round 17, 2 st from the centre front line, toward the toy's left ) → (in round 17, 2 st from the centre front line, toward the toy's left ) → (between rounds 17 and 18, 2.5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the cactus), straight stitches through: (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's right ) → (in round 15, on the centre front line ) → (in round 15, on the centre front line ) → (in round 15, on the centre front line ) → (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's left ).
  • Safety eyes with a printed glint 9 mm (on the rosette ball): in round 9, 7 st apart (count along round 9: about 3.5 st each side of the centre front line).
  • Satin stitch (on the rosette ball): in dark brown thread, a oval about 4 mm wide and 3 mm tall, horizontal stitches; centred in round 7, on the centre front line .
  • Safety eye with a printed glint 9 mm (on the aloe): in round 9, 2 st from the centre front line, toward the toy's left .
  • Embroidery in dark brown thread (on the aloe), straight stitches through: (between rounds 9 and 10, 1 st from the centre front line, toward the toy's right ) → (in round 10, 2 st from the centre front line, toward the toy's right ) → (in round 10, 3 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the aloe), straight stitches through: (between rounds 6 and 7, 1 st from the centre front line, toward the toy's right ) → (in round 6, 0.5 st from the centre front line, toward the toy's right ) → (in round 6, on the centre front line ) → (in round 6, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 6 and 7, 1 st from the centre front line, toward the toy's left ).

Abbreviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Mushroom Keychain
    Engine
    Crochet itRemix

    Mushroom Keychain

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Cactus Keychain
    Engine
    Crochet itRemix

    Cactus Keychain

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Tulip in a Heart Pot with Bee
    Engine
    Crochet itRemix

    Tulip in a Heart Pot with Bee

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Shy Rose in a Mustard Pot
    Engine
    Crochet itRemix

    Shy Rose in a Mustard Pot

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Mushroom Couple Cap to Cap
    Engine
    Crochet itRemix

    Mushroom Couple Cap to Cap

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Mushroom Family of Three
    Engine
    Crochet itRemix

    Mushroom Family of Three

    by the pattern engine

    Difficulty
    3/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Monstera in a Pot with a Cat
    Engine
    Crochet itRemix

    Monstera in a Pot with a Cat

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    2/5
    Times crocheted
    0
  • Preview of Tiny Desk Cactus with a Bee
    Engine
    Crochet itRemix

    Tiny Desk Cactus with a Bee

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Christmas Wreath with a Face
    Engine
    Crochet itRemix

    Christmas Wreath with a Face

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Smiling Pinecone Ornament
    Engine
    Crochet itRemix

    Smiling Pinecone Ornament

    by the pattern engine

    Difficulty
    3/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Toadstool Ornament
    Engine
    Crochet itRemix

    Toadstool Ornament

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0