Receita de Derpy Reindeer Ornament de crochê (PDF grátis)

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R10–1654 sc(54)
R17(7 sc, dec) ×6(48)
R1848 sc(48)
R19(6 sc, dec) ×6(42)
R203 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R21(4 sc, dec) ×6(30)
R222 sc, (dec, 3 sc) ×5, dec, 1 sc(24)
R23(2 sc, dec) ×6(18)
R24(1 sc, dec) ×6(12)
R25dec ×6(6)
Size before assembly: about 5.6 cm at the widest, 4.6 cm long; 25 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with cream: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
A flat circle about 2.3 cm across; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with red: 6 sc in MR(6)
R2inc ×6(12)
R3–412 sc(12)
R5dec ×6(6)
Size before assembly: about 1.2 cm at the widest, 1.2 cm long; 5 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with brown: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3(2 sc, inc) ×3(12)
R42 sc, (inc, 3 sc) ×2, inc, 1 sc(15)
R5–814 sc in brown, 1 sc in cream(15)
R9(3 sc, dec) ×3(12)
R101 sc, (dec, 2 sc) ×2, dec, 1 sc(9)
Size before assembly: about 1.8 cm at the widest, 2.5 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Change to brown (pull it through on the last yarn-over of R8).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.1 mm deep in front, a rounded back; about 18 mm wide. Keep the opening a curve, hollow side forward, not a straight line.

R1with beige: 6 sc in MR(6)
R23 sc, inc, 2 sc(7)
R36 sc, inc(8)
R4–138 sc(8)
R143 sc, dec, 3 sc(7)
Size before assembly: about 0.8 cm at the widest, 3.7 cm long; 14 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 30° around round 9. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 9, 2 st from the centre front line, toward the toy's left ). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 8 and 9 together. Bend the second piece as a mirror image.

R1with beige: 5 sc in MR(5)
R22 sc, inc, 2 sc(6)
R3–66 sc(6)
R74 sc, dec(5)
Size before assembly: about 0.6 cm at the widest, 1.8 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with pink: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.1 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with gold: ch 20 and join into a ring with a sl st in the first ch (do not twist); 20 sc, one in each ch of the ring(20)
R2–320 sc(20)
Size before assembly: about 1.9 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 20 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread, a oval about 11 mm wide and 12 mm tall, horizontal stitches; centred between rounds 15 and 16, 3.5 st from the centre front line, toward the toy's left .
Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 6 mm wide and 6.5 mm tall, horizontal stitches; centred between rounds 15 and 16, 2.5 st from the centre front line, toward the toy's left .
Embroidery in black thread (on the muzzle patch), straight stitches through: (in round 3, 1.5 st from the centre bottom line, toward the toy's left) → (between rounds 3 and 4, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 3 and 4, on the centre bottom line) → (between rounds 3 and 4, 1 st from the centre bottom line, toward the toy's right ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's right).
Satin stitch (on the muzzle patch): in pink thread, a oval about 4 mm wide and 5 mm tall, horizontal stitches; centred in round 4, on the centre bottom line .