Receita de Leggy Turtle de crochê (PDF grátis)

R1with dark green: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R842 sc(42)
R9(6 sc, inc) ×6(48)
R1048 sc(48)
R11(7 sc, inc) ×6(54)
R1254 sc(54)
R13(8 sc, inc) ×6(60)
R14–1760 sc(60)
R18–2060 sc(60)
R21(BLO)60 sc(60)
R222 sc, (dec, 3 sc) ×11, dec, 1 sc(48)
R23(2 sc, dec) ×12(36)
R24(1 sc, dec) ×12(24)
R25dec ×12(12)
R26dec ×6(6)
Size before assembly: about 8.1 cm at the widest, 6.2 cm long; 26 rounds.
Change to cream (pull it through on the last yarn-over of R17).
Change to light green (pull it through on the last yarn-over of R21).
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Round 1with green: into a magic ring; 6 sc(6)
Round 2inc ×6(12)
Round 3(1 sc, inc) ×6(18)
Round 4(2 sc, inc) ×6(24)
Of these: top — 1; front — 1; side, front — 2 (left and right); side, back — 2 (left and right); back — 1. Flat motif — hexagon (worked in rounds, one layer of fabric), about 3.2 × 2.8 cm; 4 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Round 1with green: into a magic ring; 6 sc(6)
Round 2inc ×6(12)
Round 3(1 sc, inc) ×6(18)
Of these: lower, front — 2 (left and right); lower, mid — 2 (left and right); lower, back — 2 (left and right). Flat motif — hexagon (worked in rounds, one layer of fabric), about 2.4 × 2.1 cm; 3 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with light green: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7–1036 sc(36)
R11(4 sc, dec) ×6(30)
R12–1530 sc(30)
Size before assembly: about 4.8 cm at the widest, 4.6 cm long; 15 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with light green: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(1 sc, inc) ×3(9)
R41 sc, (inc, 2 sc) ×2, inc, 1 sc(12)
R512 sc(12)
Size before assembly: about 1.6 cm at the widest, 1.5 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc, inc, 1 sc, inc(22)
R4–522 sc(22)
R61 sc, dec, 2 sc, dec, 2 sc, dec, 3 sc, dec, 2 sc, dec, 2 sc(17)
R71 sc, dec, 1 sc, dec, 1 sc, dec, 2 sc, dec, 1 sc, dec, 1 sc(12)
R812 sc(12)
R910 sc, dec(11)
R10–2011 sc(11)
Size before assembly: an oval about 3.2 × 2 cm at the widest, 6.8 cm long; 20 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
With orange: ch 5.
Change to white (pull it through on the last yarn-over of R6).
Change to light green (pull it through on the last yarn-over of R8).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 10–12 mm (on the head): between rounds 4 and 5, 15 st apart (count along round 4: about 7.5 st each side of the centre top line).
Embroidery in black thread (on the head), straight stitches through: (in round 4, 2 st from the centre bottom line, toward the toy's left ) → (in round 4, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 4 and 5, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 4, on the centre bottom line ) → (between rounds 4 and 5, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 4, 1.5 st from the centre bottom line, toward the toy's right ) → (in round 4, 2 st from the centre bottom line, toward the toy's right ).