amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Dachshund crochet pattern

  • Mathematically BalancedChecked by script: in all 135 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~6 h
Size
15.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A free crochet dachshund pattern for a long little sausage dog standing on four short paws, with long floppy ears and a thin tail. This amigurumi dachshund is chocolate brown with tan eyebrow dots, a tan snout, chest and paws, pink cheeks and big shiny eyes. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook: one long stuffed body, a round head, lightly stuffed hanging ears and four paws, about 15 cm (6 in) tall and 23 cm (9 in) long. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece is sewn.

How to crochet the Dachshund

Advanced · 15 cm tall · about 6 h · DK yarn · 2.5 mm hook

  1. Crochet the 12 pieces in rounds: Body, Head, Muzzle, Ear ×2, Paw ×4, Tail, Cheek ×2 (135 rounds in all).
  2. Stuff and put it together in 8 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 9 gathered

Gauge

More like this

All dog patterns →All animals →
  • Preview of Winnie-the-Pooh with a Honey Pot
    Engine
    Crochet itRemix

    Winnie-the-Pooh with a Honey Pot

    by the pattern engine

RemixCrochet it

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 82 rounds done

  22. Size before assembly: about 7.7 cm at the widest, 16 cm long; 49 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  23. → Start stuffing (firmly) and keep adding as you decrease.
  24. Press the piece flat to about 6.3 cm thick (oval cross-section).<!-- press the piece flat by 18 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  30. Size before assembly: about 10 cm at the widest, 8.9 cm long; 33 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  31. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  32. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: an oval about 4.2 × 2.2 cm at the widest, 2.9 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With tan: ch 7.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  14. Size before assembly: about 5.1 cm at the widest, 7.3 cm long; 22 rounds.
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 4.8 mm deep in front, a rounded back; about 51 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 20<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 20, 1.5 st from the centre bottom line, toward the back <!-- st 1.43 back -->). If the ear sticks out, smooth it down along the head by hand.

  8. Of these: front — 2 (left and right); hind — 2 (left and right). Size before assembly: about 2.8 cm at the widest, 2.4 cm long; 8 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 1.3 cm at the widest, 4.1 cm long; 12 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 40° around round 8<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 8, on the centre top line). On the inner side draw rounds 8 and 9 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 16 mm (on the head): between rounds 17 and 18, 12 st apart (count along round 17: about 6.2 st each side of the centre front line).
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in tan thread, a oval about 8.5 mm wide and 5.5 mm tall, horizontal stitches, turned 12° anticlockwise (looking at that surface); centred in round 13, 5 st from the centre front line, toward the toy's left .
  • Safety nose, oval, 12×9 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose #1f1b1a.
  • Embroidery in nose thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (between rounds 2 and 3, on the centre bottom line).
  • Embroidery in nose thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2.5 st from the centre bottom line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Tigger the Bouncy Tiger
    Engine
    Crochet itRemix

    Tigger the Bouncy Tiger

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Speedy Blue Hedgehog
    Engine
    Crochet itRemix

    Speedy Blue Hedgehog

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of White Beagle with Black Ears
    Engine
    Crochet itRemix

    White Beagle with Black Ears

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Grey Tabby Loaf Cat
    Engine
    Crochet itRemix

    Grey Tabby Loaf Cat

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Confused Yellow Duck
    Engine
    Crochet itRemix

    Confused Yellow Duck

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Pudding Puppy in a Beret
    Engine
    Crochet itRemix

    Pudding Puppy in a Beret

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Electric Yellow Mouse
    Engine
    Crochet itRemix

    Electric Yellow Mouse

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Piglet in a Green Jumper
    Engine
    Crochet itRemix

    Piglet in a Green Jumper

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Peter Rabbit in a Blue Jacket
    Engine
    Crochet itRemix

    Peter Rabbit in a Blue Jacket

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Bunny in a Pink Hood
    Engine
    Crochet itRemix

    Bunny in a Pink Hood

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Simple White Bunny in a Dress
    Engine
    Crochet itRemix

    Simple White Bunny in a Dress

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done