amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Polar Bear Cub with Cocoa crochet pattern

  • Mathematically BalancedChecked by script: in all 127 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~4 h
Size
14.3 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet polar bear pattern: a Polar Bear Cub with Cocoa amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. The white cub sits hugging an oversized red mug of cocoa topped with marshmallows, wearing a blue beanie and a blissful sleepy smile. You need about 130 m of yarn: 90 m white, 15 m blue, 15 m red, 5 m brown and 5 m beige. Plan on roughly 4 hours. A cosy gift for hot chocolate fans and a sweet shelf companion through winter. Turn the 3D model around to see how the mug is held and follow the round-by-round pattern.

How to crochet the Polar Bear Cub with Cocoa

Advanced · 14 cm tall · about 4 h · DK yarn · 2.5 mm hook

  1. Crochet the 16 pieces in rounds: Body, Head, Muzzle, Arm ×2, Leg ×2, Tail, Ear ×2, Beanie, Pom-pom, Mug, Marshmallow ×2, Mug handle (127 rounds in all).
  2. Stuff and put it together in 13 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 10 gathered

More like this

All bear patterns →All polar bear patterns →All animals →
  • Preview of Winnie-the-Pooh with a Honey Pot
    Engine
    Crochet itRemix

    Winnie-the-Pooh with a Honey Pot

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 92 rounds done

  1. Size before assembly: about 7.5 cm at the widest, 6.3 cm long; 21 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.6 cm at the widest, 6.6 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Change to white (pull it through on the last yarn-over of R1).
  3. → This piece is not stuffed.
  4. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.1 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 25 mm across.<!-- (dish 50 %) -->

  1. Size before assembly: about 6.6 cm at the widest, 4.2 cm long; 14 rounds.
  2. Change to white (pull it through on the last yarn-over of R12).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4 cm at the widest, 4.7 cm long; 18 rounds.
  2. Change to brown (pull it through on the last yarn-over of R14).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 1.4 cm long; 4 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 1.1 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 8 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety nose, triangle, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line .
  • Embroidery in black thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 3 st from the centre bottom line, toward the toy's left ).
  • Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 17, 6.5 st from the centre front line, toward the toy's left . Colour pink.
  • Embroidery in black thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 16, 3.5 st from the centre front line, toward the toy's left ) → (in round 17, 4.5 st from the centre front line, toward the toy's left) → (in round 16, 5.5 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    by the pattern engine
    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Tigger the Bouncy Tiger
    Engine
    Crochet itRemix

    Tigger the Bouncy Tiger

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Speedy Blue Hedgehog
    Engine
    Crochet itRemix

    Speedy Blue Hedgehog

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of White Beagle with Black Ears
    Engine
    Crochet itRemix

    White Beagle with Black Ears

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Grey Tabby Loaf Cat
    Engine
    Crochet itRemix

    Grey Tabby Loaf Cat

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Confused Yellow Duck
    Engine
    Crochet itRemix

    Confused Yellow Duck

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Pudding Puppy in a Beret
    Engine
    Crochet itRemix

    Pudding Puppy in a Beret

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Electric Yellow Mouse
    Engine
    Crochet itRemix

    Electric Yellow Mouse

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Piglet in a Green Jumper
    Engine
    Crochet itRemix

    Piglet in a Green Jumper

    by the pattern engine

    Difficulty
    1/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Peter Rabbit in a Blue Jacket
    Engine
    Crochet itRemix

    Peter Rabbit in a Blue Jacket

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Bunny in a Pink Hood
    Engine
    Crochet itRemix

    Bunny in a Pink Hood

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • Preview of Simple White Bunny in a Dress
    Engine
    Crochet itRemix

    Simple White Bunny in a Dress

    by the pattern engine

    Difficulty
    2/3
    Weirdness
    1/5
    Times crocheted
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done