Winnie-the-Pooh with a Honey Pot
- Difficulty
- 2/3
- Weirdness
- 1/5
- Times crocheted
- 0
Free crochet raccoon pattern: a Raccoon with a Cookie amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. A chubby grey raccoon with a black mask and a striped tail hugs a big chocolate chip cookie in both paws and looks up with a guilty, worried face. You need about 135 m of yarn: 75 m grey, 30 m charcoal, 15 m tan, 5 m cream, 5 m pink and 5 m light brown. Plan on roughly 4 hours. It works as a cheerful gift for cookie fans and raccoon lovers or as a small shelf companion. Spin the 3D model and follow the round-by-round pattern.
How to crochet the Raccoon with a Cookie
Advanced · 14 cm tall · about 5 h · DK yarn · 2.5 mm hook
- Crochet the 17 pieces in rounds: Body, Head, Muzzle, Eye mask ×2, Light brow ×2, Cheek ×2, Ear ×2, Leg ×2, Tail, Arm ×2, Cookie (120 rounds in all).
- Stuff and put it together in 11 steps; each one lights up where it goes on the 3D model.
- Add the face: safety eyes by round and stitch, or embroider them for a child under 3.
Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.
What you'll need
0 of 11 gathered
Gauge
1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.
Worked in
Continuous spiral rounds. Don't join. Move a stitch marker up every round.
Parts
0 of 103 rounds done
- Size before assembly: about 7 cm at the widest, 4.6 cm long; 17 rounds.
- Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
- Size before assembly: about 9.9 cm at the widest, 8.4 cm long; 33 rounds.
- → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
- Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.
- Size before assembly: about 3.2 cm at the widest, 1.1 cm long; 5 rounds.
- Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
- A flat oval about 4.1 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
- With charcoal: ch 5.
- Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.
- A flat oval about 3.1 × 0.7 cm; 1 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 3 more (not counted in any round) and place the marker there. The increases fall on the turns.
- With cream: ch 8.
- Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.
- A flat circle about 1.5 cm across; 2 rounds.
- Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.
- Size before assembly: about 3.2 cm at the widest, 1.7 cm long; 6 rounds.
- Change to charcoal (pull it through on the last yarn-over of R2).
- Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–3 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 3 mm at the centre) and turn rounds 4–6 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 32 mm across.<!-- (dish 50 %) -->
- Size before assembly: an oval about 3.7 × 2.9 cm at the widest, 2.7 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
- With charcoal: ch 4.
- Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
- Size before assembly: about 4.1 cm at the widest, 5.4 cm long; 17 rounds.
- Change to charcoal (pull it through on the last yarn-over of R4).
- Change to grey (pull it through on the last yarn-over of R6).
- Change to charcoal (pull it through on the last yarn-over of R8).
- Change to grey (pull it through on the last yarn-over of R10).
- Change to charcoal (pull it through on the last yarn-over of R12).
- Change to grey (pull it through on the last yarn-over of R14).
- Change to charcoal (pull it through on the last yarn-over of R15).
- Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
- Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
- Change to grey (pull it through on the last yarn-over of R4).
- Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
- Size before assembly: about 5.5 cm at the widest, 3.1 cm long; 16 rounds.
- Change to tan (pull it through on the last yarn-over of R1).
- → Start stuffing (moderately) and keep adding as you decrease.
- Press the piece flat to about 3.9 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.
Nobody has shown theirs yet. Be the first.
Sign in to show yours
No questions yet
Ask the first one — the author and the AI helper both read here.
Make this toy yours
Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.
Try asking:
